Kodak manual Finding a location for your printer dock, Installing the custom camera insert

Page 8

Getting started

Finding a location for your printer dock

Place the printer dock on a flat, clean, dust-free surface, in a dry location, and out of direct sunlight.

Allow 5 in. (12.7 cm) clearance on all sides of

the printer dock.

For proper ventilation, make sure the top and back of the printer dock are not blocked.

When connecting power or USB cables, keep the cables clear of the paper path to the front and rear of the printer dock.

Avoid areas where ventilation ducts, open doors, or frequent passersby might expose the printer dock and paper to high levels of dust and debris. Airborne dirt particles can affect picture quality.

Installing the custom camera insert

The printer dock comes with a universal camera insert already installed. The insert allows most Kodak EasyShare CX/DX6000/7000 series and LS600/700 series digital cameras to fit on the printer dock.

For best fit, use the custom camera insert that came with your camera and keep the universal camera insert as a spare.

NOTE: For some cameras, you must use the custom camera insert to dock the camera, otherwise the camera will not fit properly on the printer dock.

1Remove the universal camera insert:

a Push the insert toward the back of the printer dock and lift up the front edge.

b Lift up the back edge of the insert and remove.

2 Install the custom camera insert included with your camera:

a Place the rear tabs of the insert in the slots toward the back of the printer dock.

b Press the front of the insert down and snap into place.

2

www.kodak.com/go/support

Image 8
Contents Kodak EasyShare Printer dock User’s GuideEastman Kodak Company State Street Rochester, New York Front/top/side view Power connector DC-in Back/top/side viewTable of contents Table of contents Package contents Getting startedInstalling the custom camera insert Finding a location for your printer dockPrinter dock Remove the universal camera insertConnecting the power Risk of Electric ShockClose the cartridge door Installing and removing the color cartridgeHandling and storing the color cartridge Getting started Handling and storing the paper Loading the paperInstalling and removing the paper tray Pull the paper tray out to remove itChoosing the right camera battery Install it in your cameraExtending battery life Important battery informationBattery safety and handling Battery charging lights turn on as Docking and charging your EasyShare digital cameraRefreshing the Ni-MH rechargeable battery pack Charging lights monitor the refresh statusDescending blinking Green lights ProgressesSetting the picture quality Tagging pictures for automatic printingSee your camera user’s guide for more information To print tagged pictures from your computerControl on the printer dock Printing without a computerPrinting from your EasyShare digital camera Canceling printing Printing tagged picturesTo print tagged pictures-press To bypass printing of tagged pictures-pressPlug the USB connector from the PictBridge Printing from a Kodak 8-in-1 card readerPrinting from a PictBridge device To print from your PictBridge deviceChanging the printed picture size Continue changing other settings or begin printingTo change the default picture size Removing perforated tabs from prints Fold the tabs up, then down Remove each tab and discardWindows OS-based computers Macintosh computers Installing the softwareMinimum system requirements Load the software Add the printer for Mac OSMac OS Uninstalling the softwareWindows OS-based computer Connecting to a computer Square USB connector on the back of the printer dockUsing the printer dock with a computer Transferring pictures from a Kodak 8-in-1 card reader Printing from a computer Printing with Kodak EasyShare softwareWindows 2000/XP OS Printing using other applicationsChoosing Kodak color mode Canceling printing Windows 98/ME OSCare and maintenance General careCleaning the paper feed roller Use the moistened cloth to gently wipe cleanDisconnect the AC power adapter and remove all cables Traveling with your printer dockTry the following TroubleshootingPrinting problems Try the following Printing Clean the feed roller To wipe cleanPrinting stops During mid-printPrint is too light Are not supported 6, then try again Try one or more of the following Problems transferring picturesPictBridge device Cause Action/solution Color cartridge lightPaper light Battery charging lights Light status Cause Action/solution Print light Light status Cause Action/solution Picture size lights Light status Cause Action/solution Still having problems? Transfer light Light status Cause Action/solutionGetting help Helpful web linksSoftware help Telephone customer supportAustralia NetherlandsGreece 00800 441 0870 243 800 901 United States 800 235 India 91 22 617Appendix Printer dock specificationsPrinter dock specifications Additional safety and maintenance tips Upgrading your software and firmwareCanadian DOC statement Regulatory informationFCC compliance and advisory Vcci Class B ITE English translationInstalling & removing ConnectingPower DC-in,ii Contents, packageTips Multi-up. See picture size BatteriesJapanese compliance Loading Removing perforated tabs, 17 slot Picture size Number of copies, 16 buttonSizes/layouts, 16 pictures Printing from Kodak 8-in-1 card readerService and support, 42 setup Uninstalling softwareKodak EasyShare, printing with Tabs, removing from prints, 17 tagging

printer dock specifications

The Kodak printer dock is a popular device that combines compact design with advanced printing technology to produce high-quality photos effortlessly. Designed with ease of use in mind, the Kodak printer dock allows users to print photos directly from their smartphones, tablets, or cameras, eliminating the need for a computer.

One of the standout features of the Kodak printer dock is its ability to produce stunning 4 x 6-inch prints in just a matter of seconds. This impressive speed makes it an ideal choice for events, gatherings, or simple everyday use, where immediate photo printing can capture memories right as they happen. With a user-friendly interface and simple connectivity options, users can seamlessly print directly from their devices using Wi-Fi or USB connections.

The printer dock utilizes dye-sublimation technology, which ensures vibrant colors and sharp details in every print. Unlike traditional inkjet printers, dye-sublimation provides a more even distribution of color, resulting in prints that are resistant to fading and smudging. This technology also allows for the creation of borderless prints, giving photos a polished and professional look.

Another significant advantage of the Kodak printer dock is its compact and portable design. Weighing in at under five pounds, this printer dock is lightweight, making it easy to carry for travel or events. Its stylish aesthetic also makes it a fitting addition to any home or office environment.

The printer dock features a built-in scanner, allowing users to digitize old photographs or documents with ease. This dual functionality enhances the overall value of the device, catering to a broader range of photo-related needs. Additionally, the Kodak printer dock is compatible with various media formats, including postcard-sized and sticker prints, providing versatility for creative projects.

Finally, the Kodak printer dock supports mobile applications, enabling users to edit and customize their prints before bringing them to life. Filters, frames, and other editing tools empower users to add personal touches to their photos, enhancing the overall printing experience. In summary, the Kodak printer dock stands out as a user-friendly, portable, and versatile solution for anyone looking to print high-quality photos with speed and convenience. Whether for personal use or special events, this device meets the demands of today's digital photography era.