Access DVD menu
1 Press DISC to access disc main menu.
2 Select a play option, then press OK.
•In some menus, press number buttons to input your selection.
•To return to the title menu during playback, press TITLE.
Access VCD menu
The PBC (Playback Control) for VCD is turned on by default in the factory. When you load in a VCD, the contents menu is displayed.
1 Press vV to select a play option, then press OK to start play.
•If PBC is off, it skips the menu and starts play from the first title.
•During playback, you can press BACK to return to the menu (if the PBC mode is on.)
Tips
•The default setting for PBC is on. To change the default setting, see chapter ‘Adjust settings’ -
[ Preference Setup ] > [ PBC ] for details.
Sync audio output with video play
If the video play is slower than the audio output (sound does not match with the pictures,) you can delay the audio output to match the video.
1 Press and hold AUDIO SYNC until ‘AUDIO SYNC XXX’ is displayed.
• ‘XXX’ denotes the delay time.
2 Within five seconds, press VOL +- to set the delay time for audio output.
Note
•If the volume control is not used within 5 seconds, it resumes normal volume control function.
28EN