Kodak A-41069 user manual Code Operator Message Displayed Description/Action Required

Page 76

 

Code

Operator Message Displayed

Description/Action Required

 

 

 

 

 

 

E121

Check front patch reader

Patch code not recognized.

 

E122

Check rear patch reader

Verify that the patch document was fed into the

 

 

 

transport in the proper orientation.

 

 

 

If not, refeed the patch document.

 

 

 

If so, change to a non-patch mode to continue;

 

 

 

call service.

 

 

 

 

 

 

E123

Command data rejected - resend

Command not recognized. Enter command again.

 

 

 

 

 

 

E124

Command not allowed in this model

Command cannot be performed.

 

E125

 

Enter a valid command.

 

 

 

 

 

 

E126

Enter correct command

Press correct key(s) for mode selected.

 

 

 

 

 

 

E127

Feeder waiting for host system

System is busy. No action required.

 

 

 

Wait for message to clear.

 

 

 

 

 

 

E128

Feeder adjustment warning

Check and adjust feed and separator roller gap.

 

 

 

 

 

 

E130

OCR not installed

Requested action requires installation of the OCR

 

 

 

accessory.

 

 

 

 

 

 

E131

Device not enabled

Requested action requires installation of the Bar

 

 

 

Code Reader.

 

 

 

 

 

 

E132

Enable barcode first

Requested action requires that you enable the

 

E133

 

Bar Code Reader.

 

 

 

Enter function code F60 to enable bar code reading.

 

 

 

 

 

 

E140

Document Printer not installed

Requested action required installation of the

 

E141

Patch Reader not installed

module/accessory indicated.

 

E142

Detection System not installed

The required module/accessory is not installed.

 

E143

Barcode Reader not installed

 

 

 

E145

Endorser not installed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A-41069 January 1993

6-3

Image 76
Contents Kodak Imagelink Scanner 900 Table of Contents Troubleshooting Scanner 900 MaintenanceScanner 923 Maintenance Operator FunctionsScanner features IntroductionScanner options Scanner components Front viewRear view Status display ModeOperating keys and indicators Key/Indicator FunctionKeys/Indicators Function ENDIII Next Modes Basic ConceptsLinked modes January Image addresses Assigning an image addressF97, simply press the Next key or enter Function Code F97 January Indexing schemes Image address formatsSingle level indexing Two level indexing Two Two level offset indexing Two Three level indexing Section Image Address One Two Header Chapter Three level offset indexing Section Image Address One Header Chapter Controlling document level changes Level InstructionSpecial considerations BatchingChecking the meters Scanning considerations Image headers Header flagsTurning on the Scanner Getting StartedSelecting the language display Calibrating the Scanner Unsuccessful calibration Adjusting the feed and separator roller gap January January Adjusting the feed shelf position Adjusting the feed shelf side guides Adjusting the exit hopper side guides and end stop Changing the deflector Preparing documents for scanning Operating the Scanner OverviewSelecting a mode Temporary operating values Feeding documents Feeding thick documents Using function codes Function CodesFunction code summary Footswitch Bar CodeDocument Controller Document PrintersF01 Select Mode F02 Restore ModeFunction code descriptions F04 Counting OnlyF05 Accessory Status F06 Terminate BatchF07 Level F08 Last Image AddressF09 Total Document Count F10 Level 0 CountF14 Reset Level Counts F15 Alarm VolumeF12 Level 2 Count F13 Level 3 CountF17 Elapsed Time F16 Alarm ToneF18 Display Contrast F19 Display Language F20 Measurement SystemF21 Change Time F22 Change DateF23 Time and Date Display F34 Operator IDF37 Scanner Calibration F38 Scanner End-of-JobF39 Printer Character Shift F40 All Document Printers On/OffF41 Primary Document Printer 1 On/Off F42 Secondary Document Printer 1 On/OffF43 Document Printer 12 On/Off F44 Omit Printing on Next DocumentF45 Print Test F46 Print PositionF49 Purge Frequency F48 Purge Print HeadF50 Patch Reader 1 On/Off F51 Patch Reader 2 On/Off F52 End Fed Patch Reading On/OffF54 Omit Patch Reading on Next Document F53 Patch Reading Confirmation ToneF56 Printer Open Jet Test F58 Endorser Mode F57 Endorser On/OffF59 Endorser Print Position F60 Bar Code Reading On/OffF62 Bar Code/Patch Reading Confirmation Tone F63 Bar Code Reading Confirmation ToneF64 Omit Bar Code Reading on Next Document F65 Bar Code TestF66 Partial Bar Code Reading On/Off F70 Length Checking On/OffF71 Omit Length Checking on Next Document F72 Skew DetectionF73 Latched Scanning Flag On/Off F74 Momentary Scanning FlagF75 Footswitch Confirmation Tone F76 OCR On/OffF91 Select Linked Mode F92 Fixed FieldF93 Action/Confirmation Tone F94 LevelF95 Level F96 LevelF98 Stop F97 Next Image AddressF99 Run Users System administrators Operator MessagesOperator message listing Code Operator Message Displayed Description/Action RequiredCode Operator Message Displayed Description/Action Required Code Operator Message Displayed Description/Action Required Code Operator Message Displayed Description/Action Required Code Operator Message Displayed Description/Action Required Code Operator Message Displayed Description/Action Required Various messages Trouble and remedy chart TroubleshootingTrouble Probable Cause Remedy Trouble Probable Cause Remedy Clearing the document path Document pathClearing documents Roller Cover Release Lever Feed Roller Separator Roller January January January January January Cleaning tasks Scanner MaintenanceCleaning materials Daily maintenance procedures Cleaning the imaging guidesJanuary Cleaning the document Scanning array DSA Window Lens Mounting Bracket Weekly maintenance procedures Vacuuming inside the ScannerVertical Baffle Handle Upper Lamp Housing Cleaning the feed Separator rollersCleaning the cabinet Monthly maintenance procedures Checking the air filterReplacement procedures Replacing the air filterReplacing the document scanning array lamp DSA Window Lens Mounting Bracket January Replacing the exposure lamps Refer to Changing the imaging guidesTab Index Mode function code, 5-18 on/off function code III Printer Scanner, components, 1-3 features, 1-1 options

A-41069 specifications

The Kodak A-41069 represents a significant advancement in the field of imaging technology, combining innovative features with user-friendly design to enhance the photography experience. This model is designed for both amateur photographers and seasoned professionals looking for reliable performance in a compact form.

One of the standout features of the Kodak A-41069 is its impressive image sensor. With a high-resolution capability, the camera ensures that every shot captures intricate details and vibrant colors. The lens system is engineered to provide excellent optical clarity, allowing users to shoot in various lighting conditions without compromising quality.

The A-41069 incorporates advanced autofocus technology that enables quick and accurate focusing on subjects, thereby reducing the likelihood of missed opportunities. This is particularly beneficial in dynamic environments, such as sporting events or wildlife photography, where capturing the perfect moment is crucial.

In addition to its stellar photo capabilities, this model includes a suite of video recording features. Users can shoot high-definition videos, making it an excellent choice for those who wish to document events or create content for social media. The camera’s image stabilization technology further enhances video quality by minimizing blurriness caused by shaky hands.

The Kodak A-41069 also prioritizes connectivity with integrated Wi-Fi and Bluetooth options. This allows users to easily share their photos and videos on various platforms or with friends and family without the hassle of transferring files manually. The user interface is designed to be intuitive, with accessible buttons and a clear LCD display that simplifies navigation through menus and settings.

Another appealing characteristic of the A-41069 is its robust battery life, ensuring that users can shoot extensively without frequent recharging. This aspect makes it an ideal choice for travel photography and other outdoor activities where access to power sources may be limited.

Furthermore, the camera features various shooting modes and filters, enabling users to experiment creatively and adapt to different shooting environments. From portrait mode to landscape settings, the Kodak A-41069 accommodates a wide range of photography styles.

In conclusion, the Kodak A-41069 is a versatile camera that successfully blends advanced technology with ease of use. Its high-resolution capabilities, fast autofocus, video functionality, and connectivity options make it a valuable tool for anyone passionate about capturing life’s moments. Whether for personal use or professional projects, this model stands out as a reliable option in the competitive camera market.