Kodak 7020, 9020, 5020, 4020 Possible problems during operation, 3UREOHP 3RVVLEOHUHDVRQV +HOS

Page 17

Possible problems during operation

3UREOHP

 

3RVVLEOHUHDVRQV

 

+HOS

 

 

 

After switching on, the projector is not

Fuse (primary or secondary) blown.

Check fuse and possibly replace it.

operable. No defect is indicated by the red

 

 

For UK users: Check 13 A plug fuse also.

LED.

 

 

 

 

 

 

 

EKTAPRO 7020/9020: After switching on,

The projector is in "silent mode" (no

Press transport button and the projector will leave the silent mode (see.

the tray is moved (to 0-position) and the

defect).

page 24).

projector is switched off.

 

 

 

 

 

 

 

 

Red LED is flashing, and all functions

Projector drive system failure (tray

1.

Switch off projector; lift off slide tray; remove slide from the slide

are blocked (after switching-on or during

transportation, slide lift):

gate; rotate the base plate until it locks in position; replace the tray and

operation).

1.

Jammed slide in the slide gate.

switch on the projector.

 

2.

Slide tray base plate not in the zero

2.

Switch off projector; lift off slide tray, rotate the base plate until it

 

position.

locks in position; replace tray and switch on the projector.

 

3.

Slide tray base plate bent.

 

 

 

 

 

3.

Use a new slide tray.

 

4.Tray setting switch is not set correctly!

 

 

 

 

 

4.

Switch off projector; lift off slide tray, rotate the base plate until it

 

 

 

locks in position; set tray setting switch to correct position (see page 24);

 

 

 

replace tray and switch on the projector.

 

 

 

 

 

Image can’t be focused by focus buttons.

1.

Lens mount was not set to its default

1.

Press focus buttons to move lens mount to its default setting. Focus the

 

position.

image as indicated in the manual.

 

2.

Slide is distorted

2.

Use glass mounted slides.

 

3.

Slide mount is defective.

3.

Replace slide mount.

 

 

 

The tray cannot be fit on the tray transport

Tray transport ring not in zero position.

- Hold slide change buttons depressed till tray stops in zero-position or

ring

 

 

- switch projector off and then on again.

 

 

 

The tray cannot be moved.

Tray has not been placed correctly on the

Lift off the tray; switch projector on and then off again and then replace

 

transport ring.

tray.

 

 

 

Slides are one-sided illuminated.

Condensor out of position.

Switch off the projector; pull out the lamp module and let it cool down;

 

 

 

check that the condensor is correctly seated and push back into position if

 

 

 

necessary.

 

 

 

 

 

Fan runs but lamp is switched off.

1.

Lamp failure

1.

Refer to page 32

 

2.

Lamp module is not properly fixed.

2.

Refer to page 32

 

 

 

 

 

Even if autofocus is switched on, the

1.

Lens mount was not set to its default

1.

Switch autofocus off, move the lens mount to its middle position (s.

image is not in focus.

position.

page 26, switch on the autofocus and focus the image.

 

2.

Slide is distorted.

2.

Use glass mounted slides.

 

3.

Slide mount is defective.

3.

Replace slide mount.

 

4.

Slide in the 0-compartment of the tray

4.

Remove slide from the 0-compartment. (If necessary, further

 

 

 

information can be requested from Kodak).

 

 

 

After switching on the EKTAPRO 9020

Timer and the switch for slide tray zeroing

Switch off timer and/or switch for slide tray zeroing.

Slide Projector the tray is permanently

is switched on.

 

 

transported from the 0-position to the 1-

 

 

 

 

position and vice versa.

 

 

 

 

 

 

 

 

 

Note: If none of the faults listed above caused the problem, please contact your KODAK audiovisual products dealer.

34

Image 17
Contents Kodak Ektapro 3020 4020 5020 7020 Page Content Projector-FeaturesElectricalApprovals Electrical Approvals and Conformity MarkCEConformityMark RadiointerferenceImportant Safety Precautions Introduction Check voltage setting Switching-on the projectorSetting of a different operation voltage Switching- on the projectorTo reduce slide temperature and light output Loading and installing the slide trayExtra Bright Lamp Tray positioning index markFitting the lens Setting up the projectorLeveling the projector Line-up Ektapro 4020, 5020, 7020Please note OperationSlide changing 9020 Lamp settingMove tray to zero position Removing the slide tray in any positionFastening or mounting the projector RedLEDL2lit Random access operationRedLEDL1lit Simultaneous Projection With the Kodak Ektapro Twin Socket Adapter accessoryUsing the Kodak Ektapro IR Re- mote Systems Continuous projection ServiceReplacement of a defective lamp Maintenance and guarantee Replacement of fusesCleaning the projector Please note These fuses are different! See technical data,3UREOHP 3RVVLEOHUHDVRQV +HOS Possible problems during operationAccessories Mechanical System Illumination Technical DataControl system Connectors InterfacesElectrical System Kodak /HQVHV $..7$352Page = 35 mm Page Germany Australia
Related manuals
Manual 136 pages 25.89 Kb Manual 7 pages 740 b

5020, 9020, 7020, 4020 specifications

Kodak has long been a prominent name in the printing industry, and its line of multifunctional devices, specifically the Kodak 9020, 7010, 7020, and 9010 printers, showcases the brand's commitment to innovation and quality.

The Kodak 9020 is engineered for high-volume printing environments, offering speeds of up to 90 pages per minute. This model features advanced color technology, ensuring vibrant and accurate color reproduction while maintaining efficiency. It's equipped with a robust 10-inch touchscreen interface, making navigation and operation intuitive for users. Moreover, the printer supports various media types and sizes, catering to diverse printing needs, from standard documents to high-quality marketing materials.

In contrast, the Kodak 7010 is tailored for small to medium-sized offices that require reliable functionality without compromise. With print speeds of up to 70 pages per minute, it strikes a balance between performance and affordability. The Kodak 7010 provides automatic duplex printing and a reliable scanning feature, enhancing productivity and reducing paper costs. Additionally, it boasts advanced security features, ensuring sensitive information remains protected.

The Kodak 7020 builds on the features of the 7010 while offering enhanced scanning capabilities. It is capable of scanning double-sided documents efficiently, making it ideal for businesses that frequently handle multi-page forms and reports. The printer offers a range of connectivity options, including Wi-Fi and Ethernet, enabling seamless integration into existing office networks.

Lastly, the Kodak 9010 is designed for users who need a machine that excels in both printing and scanning. It offers print speeds comparable to the 9020 while including advanced document capture solutions. This model has an automatic document feeder that can handle multiple pages, allowing for quick processing of large jobs. The 9010 also integrates advanced cloud capabilities, making it easier to print from mobile devices and cloud storage services.

All four models represent Kodak’s dedication to providing versatile, efficient, and reliable solutions for diverse business needs. With a combination of robust features, user-friendly interfaces, and advanced technologies, these printers aim to enhance productivity while minimizing operational costs, making them ideal choices for both small and large enterprises. Whether it’s high-speed printing, advanced scanning capabilities, or tight security measures, the Kodak 9020, 7010, 7020, and 9010 models cover a comprehensive range of office printing requirements.