Kodak ESP 7200 Series manual Safety information, LCD screen safety

Page 83

KODAK ESP 7200 Series All-in-One Printer

Safety information

•Always follow all warnings and instructions marked on the product.

•Use only the power source indicated on the product regulatory label.

•Use only the power cord that comes with the product. Using another power cord may cause fire and/or shock. Do not use the included power cord with any other equipment.

•Always turn this product off by using the On/Off button. Wait until the On/Off button stops flashing before removing the power plug from the outlet.

•Do not allow the power cord to become damaged or frayed.

•If you need to use an extension cord with this product, make sure that the ampere rating of the product does not exceed the ampere rating of the extension cord.

•Place the product on a flat, stable surface that extends beyond the product’s base in all directions. This product will not operate properly if tilted or at an angle.

•When storing or transporting this product, do not tilt or stand it on its side. Never turn this product upside down (ink can leak out of the product).

•Avoid placing this product in an environment that is subject to rapid changes in temperature or humidity, mechanical shocks, vibration, or dust. Do not place near radiators, heating vents, or in direct sunlight.

•Leave enough room around this product for sufficient ventilation.

•Do not block this product’s covers or openings, or insert any objects through slots.

•Do not use aerosol products inside or around this product.

•Do not spill any liquid on this product.

•Do not attempt to repair or service this product.

•If the power cord or plug is damaged, if any liquid has been spilled onto the product, if the product has been dropped or the case damaged, if the product does not operate normally or exhibits a major change in performance level, unplug this product and contact Kodak at www.kodak.com/go/contact.

LCD screen safety

•Use only a dry, soft cloth to clean the LCD screen. Do not use any liquid or chemical cleaners.

•If the LCD screen is damaged, contact Kodak immediately. If any of the solution from the display gets on your hands, wash them thoroughly with soap and water.

www.kodak.com/go/aiosupport

77

Image 83

Contents User Guide Kodak ESP 7200 Series All-in-One PrinterPage Table of contents Maintaining Your Printer TroubleshootingProduct and Safety Specifications ScanningIii Page Components Printer OverviewControl panel Feature DescriptionHome Center Software Configuring printer settings Configuring Your PrinterBefore you connect Connecting to a wireless networkConnecting to a listed network Configuring Your Printer Connecting to an unlisted network With Push Button Configuration selected, press OK Using WPS to connect to a Wi-Fi networkDynamic Dhcp Automatic Private Manual Static Setting up an IP addressSelect Network Wireless/WiFi, then click Next Verifying the network configurationPrinting the network configuration Connecting to another Kodak All-in-One PrinterAdding a network connection to a USB-connected computer Changing from USB to wireless connectionIf your printer is connected to a computer with MAC OS Changing from USB to Ethernet connectionSelect Network Ethernet cable, then click Next Paper sizes Handling PaperPaper types Envelope sizes Loading paper in the main paper tray Loading paperPaper stop Output tray extender Loading legal-size paper in the main paper tray Paper tray extender Output tray extender Paper stop Loading the photo paper tray Handling Paper Loading envelopes Handling Paper Press to select Copy Photo or View and Print Photos Switching paper traysPrinting Select Automatically with Duplexer Printing documentsPrinting two-sided documents Automatic two-sided printingManual two-sided printing from a computer with Windows OS Manual two-sided printingAutomatic two-sided printing from a computer with MAC OS Short-Edge bindingSelect File Print Printing picturesManual two-sided printing from a computer with MAC OS MS/XD/SD Card slot CF Card slot Front USB port Using default settings to print a picturePrinting from a memory card or USB-connected device Changing the settings and printing a picture Settings Description Printing tagged pictures Print Photos Option Settings DescriptionPrinting panoramic pictures Zooming and cropping pictures Printing from a Bluetooth Technology enabled device Printing pictures or documents from a wireless deviceTransferring pictures to a Macintosh Computer Transferring pictures to a computerTransferring pictures to a Windows OS-based computer Copying a document Using the default settings to copy a documentCopying Copy Document Setting Description Adjusting the settings and copying a documentChanging the number of copies of a document Copy Document Setting Description OptionEnlarging or reducing a document Darkening or lightening a copy Copying a photograph Using the default settings to copy a photographCopy Photo Option Setting Description Adjusting the settings and copying a photographAlso appear X 11 or A4 Plain Paper Quality Normal Changing the number of copies of a photograph Enlarging or reducing a photograph Darkening or lightening a copy of a photograph Before you begin scanning Select Tools and Documentation Select Printer Scan SettingsScanning Scanning from the computer Scanning multiple pictures simultaneously Scanning from the control panel Scan Option Settings DescriptionDocument see Changing the scan Maintaining Your Printer General care and cleaningCleaning the scanner glass and document backing Kodak ESP 7200 Series All-in-One Printer Replacing ink cartridges Remove the protective cap from the cartridge Maintaining Your Printer Replacing the printhead Maintaining Your Printer Kodak ESP 7200 Series All-in-One Printer Maintaining Your Printer Click Tools and Documentation To update the softwareTo update the printer firmware Updating the software and printer firmwareChecking ink levels Monitoring and adjusting printer performanceTo update the firmware Resetting factory defaults Prints, etc TroubleshootingBasic troubleshooting Problem Possible SolutionsAll-in-one printer , then Paper jam Getting help on the Web For more troubleshooting informationStatus lights Power status lightWi-Fi status light Power light What it meansPrint performance Product and Safety SpecificationsFeatures and Specifications Photo printing featuresScanning features Copy document featuresCopy photo features Ink cartridges Bottom input paper trayTop input paper tray Output paper traySoftware support Physical specificationsWarranty Computer Minimum System requirementsComputer with Windows OS Computer with MAC OSPaper sizes supported Paper types supportedPhotos 4 x 6 in x 152 mm 4 x 7 in x 178 mm LCD screen safety Safety informationFCC statement Ink cartridge safetyRegulatory compliance Industry Canada IC Radiation Exposure Statement Canadian statementsGerman compliance statement Limitations Energy Star Qualified Warranty InformationLimited Warranty Limited Warranty CoverageOutside the United States and Canada Your RightsManufacturers Name Declaration of ConformityNumerics IndexPaper tray Document, 40 photo Connectivity LED, 2 status light, 69 supported technology