Philips FWV537 manual Adjusting the TV System, OSD On Screen Display, Playing a Video CD with PBC

English

VIDEO CD

àÇ á

-+

Adjusting the TV System

Before viewing the Video CD, ensure that the set is switched to corresponding PAL or NTSC system of your TV set (except Multi–system TV).

●Press and hold PAL/NTSC for

➜After TV system is selected, the set will automatically switch

to the last TV system setting every time the VCD source is selected.

Note:

–Before adjusting the TV system, make sure that there is no MP3-CD in disc tray 1 during power up.

OSD – On Screen Display

If you insert VCD, your TV screen will serve as an additional display for messages (e.g. PLAY, STOP), and information stored on the VCD.

●Press OSD on the remote control repeatedly to switch on or off the On Screen Display.

When OSD is switched ON; you can see the following display on the TV screen.

Below is an example of the OSD message.

SINGLE ELAPSED

PLAY XX/TT MM:SS

–"XX" is the current track.

–"TT" is the total tracks.

–"MM" is in minutes.

–"SS" is in seconds.

Note:

–You can also view the information from a MP3-CD or normal CD.

Playing a Video CD with PBC

VCD with PBC (Playback Control) will be indicated on the display of the set as soon as they are inserted. PBC is a predefined play sequence stored on the VCD.

1Switch on the TV, insert a VCD with PBC and press PLAYÉÅ to start playback.

2MENU appears on the TV screen.

If the menu consists of a list of titles, you

can select a sequence directly

●Press Digits 0–9on the remote control to select your choice.

➜ The VCD starts playing of the selected sequence automatically.

Note:

–If a menu consists of more than one page, press ¡ / ™ to go through the pages.

Switching off PBC

●In stop mode, press PBC.

➜ “PBC OFF” will be displayed.

Notes:

–Programme mode is not available whenever PBC mode is switched on.

–The menu structure depends on the information stored on the VCD. Please refer to the information supplied with the disc.