Kyocera FS-9530DN General, Paper Handling, Controller, Interface, Options, Consumables, Warranty

Page 2

FS-9530DN

A3 MONOCHROME DEPARTMENTAL PRINTER

ECOSYS devices are designed to minimise both direct costs

and indirect costs such as maintenance, administration and consumables. The cart- ridge-free system requires only the toner to be replaced. The modular design concept allows you to add workflow enhancing func- tions and a wide variety of paper handling capabilities as required. Integrated system software provides long-term cross-network compatibility. Kyocera’s long-life components cost you and the environment less.

System platform:

The FS-9530DN offers USB, parallel and network connectivity as standard and delivers problem-free system administration. Kyocera’s single platform technology means that the same driver can be used for every Kyocera PCL/PostScript print device on the network: from single-user desktop printers to high-end multifunctional systems. Only Kyocera offers this effortless combination of IT sophistication and high-performance paper handling expertise.

PRESCRIBE IIe:

With the Kyocera page design and control language PRESCRIBE IIe, even complex graphics, logos and forms (even multipart forms) can be created independently of the system and saved and updated in the printer. Consequently, integration into print files no longer applies. They are only accessed as required and therefore relieve the load on the network.

KM-NET for Client/KM-NET Viewer:

The settings of all printers on the network can be checked visually and amended from any Windows PC. KM-NET for Client enables easy setup and check of the printer status via parallel, USB and network connection. KM-Net Viewer is an advanced printer management software tool using the standardized protocol SNMP.

GENERAL

Technology: Kyocera ECOSYS, Laser

Engine speed: Max. 51/26 pages per minute A4/A3 simplex, max. 37/17 pages (18/8 sheets) per minute A4/A3 duplex Resolution: 1,200 dpi quality (1,800 x 600)

Time to first page: 3.5 seconds

Warm-up time: 60 seconds from power on

Duty cycle: Max. 300,000 pages per month, max. average 55,000 pages per month Power source: AC 220 ~ 240 V, 50/60 Hz

Power consumption: Printing: 900 W, Stand-by: 180 W,

Power-Saving (ECOpower): 4.5 W

Noise (ISO 7779): Printing: 54 dB(A), Stand-by: 39 dB(A),

Power-Saving (ECOpower): Immeasurably low

Dimensions (W x D x H): 599 x 646 x 615 mm

Weight: Main unit: Approx. 68 kg

Certifications: TÜV/GS, CE, PTS

This product is manufactured according to ISO 9001 quality standard and ISO 14001 environmental standard.

PAPER HANDLING

All mentioned paper quoted are based on a paper thickness of max. 0.11 mm. Please use paper recommended by Kyocera under normal environmental condition.

Input capacity: 2 x 500-sheet universal paper cassette,

60-105 g/m2, A3, A4, A4R, A5R, B4, B5, B5R, Letter, Letter-R, Legal, Ledger, Folio, STMT

200-sheet multi-purpose cassette, 45-200 g/m2, A3-A6R, Custom (88 x 148 mm to 297 x 450 mm)

Max. input capacity with optional paper feeder PF-750: 4,200 sheets

Duplex as standard supports A3, A4, A4R, A5R, B4, B5, B5R, Letter, Letter-R, Legal, Ledger, 60-80 g/m2

Output capacity: 500 sheets face-down

CONTROLLER

Processor: PowerPC 750FL / 600 MHz

Memory: Standard 128 MB + ECOmemory, max. 640 MB (1 DIMM slot)

Emulations: PCL6/PCL5e incl. PJL, PostScript 3TM (KPDL 3), PDF direct print, automatic emulation sensing (AES), HP-7550A (KC-GL), Line Printer, IBM Proprinter X24E, Epson LQ-850, Diablo 630

Controller language: PRESCRIBE IIe

Fonts: 80 outline fonts (PCL), 136 PostScript Fonts,

1 bitmap font, 45 types of one-dimensional barcodes plus two-dimensional barcode PDF-417

Downloadable fonts: Kyocera, PCL + TrueType format, Type 1 + 3 format

Print features: eMPS – job management functionality

with optional hard disk HD-5 for quick copy, proof and hold, private print and job storage

100 department codes for Accounting, PDF direct printing via USB Flash memory device, professional finishing capabilities

Your Kyocera Business Partner:

INTERFACE

Standard interface: Fast Ethernet 10/100Base-TX, High speed bi-directional parallel (IEEE 1284), USB 2.0 (Hi-Speed),

USB Host Interface dedicated for USB Flash Memory device, KUIO-LV option interface slot

Multiple interface connection (MIC): Allows simultaneous data transfer via up to four interfaces, with each interface having its own virtual printer.

OPTIONS

Paper handling

PF-700 Paper feeder: 2 x 500 sheets, 60-105 g/m2, A3, A4, A4R, A5R, B4, B5, B5R, Letter, Letter-R, Legal, Ledger, Folio,

STMT

PF-750 Paper feeder: Max. 3,000 sheets, 60-105 g/m2, A4, B5, Letter

DF-710 Document finisher + AK-705*:

Main tray: Max. 3,000 sheets A4 or 1,500 sheets A3 face-down, 60-200 g/m2, A3-B5,

Sub tray left: Max. 200 sheets A4 or 100 sheets A3/B4 face-up, 45-200 g/m2, A3-A6R,

Sub tray right: Max. 50 sheets A4 face-up, 45-200 g/m2, A4-A6R,

Stapling: Max. 50 sheets A4 or 30 sheets A3, stapling at 3 positions

BF-710 Booklet unit for DF-710: Max. 64 pages (16 sheets) booklet folding and stapling, 60-80 g/m2, cover sheet 60-200 g/m2, A3, B4, A4R

PH-5C/PH-5D Punch unit for DF-710: A3-A5R,45-200 g/m2, 2-hole/4-hole/Swedish type

MT-710 Mailbox for DF-710: 7 bins, 60-80 g/m2, A3-A5R, 7 bins x 100 sheets A4 or 50 sheets A3/B4

DF-730 Document finisher + AK-705*: Max. 1,000 sheets A4 or 500 sheets A3/B4, 64-128 g/m2, A3-B5, one position stapling max. 30 sheets A4 or 20 sheets A3/B4, 64-80 g/m2 CB-700 Cabinet (W x D x H): wooden desk with storage capacity

CB-710 Cabinet (W x D x H): metal desk with storage capacity

*Adapter-Kit AK-705 is required for the use of DF-710/ DF-730 document finisher.

The use of the hard disk HD-5 or extended RAM-Disk size is highly recommended to achieve full document finisher functionality.

Memory

Printer memory: 1 DDR-SDRAM DIMM slot (64, 128, 256 or 512 MB)

CompactFlash® card: 1 slot (up to 2 GB), forms, fonts, logos, macro storage

HD-5 Hard disk: 40 GB, storage of data, forms, fonts and job management

Data security kit C: Overwrite and encryption of HD-5

1 USB Host Interface (USB 1.1) for USB Flash Memory device supports PDF direct printing

Optional interface

IB-21E Network card: 10Base-T/100Base-TX

SB-50 Network card: 10Base-FL, FibreLink

SB-60 Network card: TokenRing STP/UTP

SB-70 Network card: Wireless LAN – IEEE 802.11b

SB-110FX Network card: 10Base-T/100Base-TX/100Base-FX, FibreOptic

SB-140 Network card: 10Base-2/10-Base-T/100Base-TX

IB-11 Serial interface: RS-232C serial interface (max. 115.2 kbps)

CONSUMABLES

TK-710Toner-kit:Microfine toner for 40,000 pages with 5% coverage (ISO/IEC 19752)

Capacity of starter toner is 20,000 pages with 5% coverage (ISO/IEC 19752)

MAINTENANCE

MK-710 Maintenance-kit: 500,000 pages

WARRANTY

2-year warranty as standard. Kyocera guarantees the drum and developer for 3-year or 500,000 pages (whichever occurs sooner), provided each printer is used and cleaned in accordance with the service instructions.

The up to 5-year on-site warranty extension for printer and options. The warranty is limited to 2 million pages (3 million pages with KYOlife).

Select your options to suit your needs:

Mailbox (MT-710)

Punch unit (PH-5C)

Document finisher (DF-710)

Booklet unit (BF-710)

Product depicted includes optional extras

0606DSE9530DNESMC

Paper feeder (PF-700)

Kyocera Mita Europe B.V., Hoeksteen 40, 2132 MS Hoofddorp, The Netherlands, Tel +31 (0) 206540000, Fax +31 (0) 206531256,

www.kyoceramita-europe.com, info@kyoceramita-europe.com

Kyocera Mita Corporation, 2-28, 1-Chome, Tamatsukuri, Chuo-Ku, Osaka 540-8585, Japan, www.kyoceramita.com

Kyocera does not warrant that any specifications mentioned will be error-free. Specifications are subject to change without notice. Information is correct at time of going to press. All other brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged.

Page 1 Page 2
Image 2
Page 1 Page 2
Contents Finished Faster General MaintenanceWarranty Paper Handling
Related manuals
Manual 84 pages 10.72 Kb

FS-9530DN specifications

The Kyocera FS-9530DN is a robust and efficient monochrome laser printer, tailored for high-volume printing in business environments. Recognized for its reliability and quality, this printer caters to various printing needs, making it an ideal choice for small to medium-sized workgroups.

One of the standout features of the FS-9530DN is its fast print speed, reaching up to 50 pages per minute (ppm). This level of performance significantly increases productivity, especially in busy office settings where time is of the essence. Furthermore, the first-page-out time is impressively quick, ensuring that users do not have to wait long for their documents.

The printer employs Kyocera's advanced Ecosys technology, which is designed to minimize environmental impact while maximizing efficiency. This technology features long-life components that reduce the need for frequent replacements, thereby lowering the overall cost of ownership. The FS-9530DN's drum unit can last up to 500,000 pages, and the toner yield is an impressive 20,000 pages, allowing businesses to focus more on their core operations rather than on maintenance.

Another notable characteristic of the FS-9530DN is its versatile paper handling capabilities. The printer supports multiple paper sizes and types, including A4, A5, letter, and legal-sized documents. It comes equipped with a standard 500-sheet cassette and a 100-sheet multi-purpose tray, while optional additional paper trays can be added to enhance capacity further. This extensive support for various media types allows for a wide range of applications, from standard document printing to more specialized jobs.

The FS-9530DN also features automated duplex printing, enabling users to print on both sides of the paper with ease. This not only conserves paper but demonstrates the printer's commitment to sustainability.

In terms of connectivity, the Kyocera FS-9530DN offers USB and network options, allowing it to be easily integrated into existing office setups. This can be complemented by additional mobile printing features, enabling seamless operation from various devices.

With its robust build quality, high-speed performance, and economical operation, the Kyocera FS-9530DN is an excellent choice for businesses looking for a reliable monochrome laser printer that can handle demanding workloads while maintaining cost efficiency and environmental responsibility.
Top Page Image Contents