NEC LCD4020 Power Indicator, Using Power Management, Selecting a video source, Picture Size

Page 24

Power Indicator*

Mode

Status Indicator Light

Power ON

Green*2

Power OFF (Eco Standby)*1

Red

Power consumption under 1W

 

Power OFF (Standby)

Amber

Power consumption under 5W

 

Power Save

Amber Blinking

Power Standby when

Green and Amber

“SCHEDULE SETTINGS” enabled

blink alternately

Diagnosis (Detecting failure)

Red Blinking

 

(See Troubleshooting page 38)

*1 When in Eco Standby Mode RS-232C controls do not function.

*2 If “OFF” is selected in POWER INDICATOR (page 27), the LED will not light when the LCD monitor is in active mode.

Using Power Management

The LCD monitor follows the VESA approved DPM Power Management function.

The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse has not been used for a fixed period.

The power management feature on your new display has been set to the “ON” mode. This allows your display to enter a Power Saving Mode when no signal is applied. This could potentially increase the life and decrease the power consumption of the display.

STANDBY mode is used when the display is connected to an RS-232C cable or when using the INPUT DETECT function.

ECO STANDBY uses less power, put the RS-232C and INPUT DETECT functions are not available.

Selecting a video source*

To view a video source:

Use the input button to set [VIDEO].

Use the COLOR SYSTEM menu to set [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.

Picture Size

DVI,VGA, RGB/HV

FULL

 

 

ZOOM

 

 

NORMAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI*, DVD/HD*,

FULL

 

 

WIDE*

 

 

 

ZOOM

 

NORMAL

 

 

 

 

 

VIDEO*, TV*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Aspect ratio Unchanged view*1

Recommended selection

of image

 

 

 

 

 

 

 

 

 

for picture size*1

 

 

 

 

 

 

NORMAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4:3

ZOOM (DYNAMIC)

FULL

Squeeze

WIDE*

Letterbox

*1 Grey areas indicate unused portions of the screen.

NORMAL: Displays the aspect ratio the same as it is sent from the source.

FULL: Fills entire screen.

WIDE*: Expands a 16:9 letter box signal to fill entire screen.

ZOOM (DYNAMIC): Expands a 4:3 pictures to fill the entire screen with non-linearity. Some of the outside image area will be cut off due to expansion.

ZOOM

The image can be expanded beyond the active display area. The image which is outside of active display area is not shown.

ZOOM

ZOOM

Picture Mode

DVI,VGA, RGB/HV STANDARD sRGB HIGHBRIGHT

HDMI*, DVD/HD*, STANDARD

 

CINEMA*

 

HIGHBRIGHT

 

 

VIDEO*, TV*

 

 

 

 

 

 

 

 

 

 

 

 

Information OSD

The Information OSD provides information such as: Monitor ID, Input Source, Picture Size, etc. Press the DISPLAY button on the remote to bring up the Information OSD.

1ID number assigned to current monitor*3

2ID number assigned monitor to be controlled via RS-232C*4

3Input Source

4Audio input mode

5Picture size

6Input Signal Information

7Sub picture information

*3: “IR CONTROL” should be set “Primary” or “Secondary”.

*4: “IR CONTROL” should be set “Primary”.

*: The product you purchased may not have this feature.

English-22

Image 24
Contents MultiSync LCD4020 MultiSync LCD4620 MultiSync LCD5220 Index Advanced OptionCanadian Department of Communications Compliance Statement FCC InformationEnglish-1 Important Information DeclarationDeclaration of the Manufacturer English-2Safety Precautions, Maintenance & Recommended Use Contents Installation Attaching Mounting Accessories Attach Mounting AccessoriesInstalling and removing optional table top stand Ventilation RequirementsPrevent Tipping English-7Parts Name and Functions Control PanelTerminal Panel Wireless Remote Control Handling the remote control Operating Range for the RemoteControl Setup Install the remote control batteriesConnect the supplied power cord Switch on the power of all the attached external equipment Adjust the soundAdjust the screen See pages 24 Adjust the image SeeWiring Diagram ConnectionsBefore making connections English-14Connecting a Personal Computer Connect the LCD Monitor to a Personal ComputerEnglish-15 Connecting to a Macintosh Computer Connect the LCD Monitor to MacintoshEnglish-16 Connecting with Digital Interface Equipment Connect the LCD Monitor to a Computer with a Digital OutputEnglish-17 Connecting a DVD Player with component out Connect the LCD Monitor to a DVD PlayerEnglish-18 RCAConnecting a DVD Player with Hdmi out Connecting a DVD Player with Scart outEnglish-19 ScartConnecting to a Stereo Amplifier Connect the LCD Monitor to a Stereo AmplifierEnglish-20 Power on and OFF Modes Basic OperationLCD4020/LCD4620 LCD5220 English-21Power Indicator Using Power ManagementPicture Mode Selecting a video sourceRemote Control OSD On-Screen-Display ControlsEnglish-23 Control Panel LCD4020/4620 LCD5220 OSD screenSetting English-24English-25 English-26 English-27 English-28 English-29 SRGBConnecting to a TV* For U.S Initial TV SetupParental Controls TV, Video input only English-30Changing the channel Connecting to a TV* For Europe Precautions when connecting the antennaVHF 300-Ohm antenna / UHF antenna English-32Image Sticking of LCD Panel RecommendationsEnglish-33 Set Monitor ID and IR Control mode English-34Connect PC and LCD monitors English-35 Connection English-36Features English-37Troubleshooting Specifications LCD4020 Product SpecificationsEnglish-39 Specifications LCD4620 English-40Specifications LCD5220 English-41Pin Assignment of DVI connector Pin AssignmentEnglish-42 Mini D-SUB 15PManufacturer’s Recycling and Energy Information Disposing of your old NEC productEnergy Saving Weee Mark European Directive 2002/96/EC

LCD5220, LCD4020 specifications

The NEC LCD4020 and LCD5220 are high-performance LCD monitors designed for various professional applications, including broadcasting, medical imaging, and graphic design. Both models are heralded for their exceptional image quality, reliable performance, and advanced technologies, making them popular choices in demanding environments.

The NEC LCD4020 is a 40-inch display that features a native resolution of 1920x1200 pixels, offering a 16:10 aspect ratio. It utilizes advanced TFT-LCD technology, delivering vibrant colors and sharp images with a wide viewing angle. One of the standout features of the LCD4020 is its high brightness level, which typically reaches up to 700cd/m2, ensuring clear visibility even in bright lighting conditions. The monitor supports various input signals, including DVI, HDMI, and VGA, allowing for versatile connectivity options. Additionally, it incorporates NEC's special ColorComp technology, which ensures accuracy in color reproduction, making it ideal for graphic design and color-critical applications.

On the other hand, the NEC LCD5220 boasts a larger 52-inch screen size with a native resolution of 1920x1080, or Full HD. The contrast ratio of this model is impressive, allowing for deeper blacks and more vibrant colors. The LCD5220 is equipped with an advanced backlight system that enhances luminance and color fidelity, essential for professional media work. This display also comes with an integrated video wall capability, enabling multiple LCD5220 units to be combined seamlessly for a larger viewing area, which is highly sought after in command centers and event spaces.

Both models feature NEC's innovative Ambix technology, which allows for simultaneous input from multiple sources without the need for complex setups. This feature is crucial in environments where multiple data streams need to be displayed concurrently. Moreover, they are designed with durability in mind, featuring robust construction that can withstand long hours of operation, making them suitable for 24/7 usage.

In summary, the NEC LCD4020 and LCD5220 are exemplars of high-quality display technology, offering users advanced features, extensive connectivity, and impressive image quality. Whether for medical imaging, broadcast, or graphic design, these monitors provide the reliability and performance professionals need to meet their demanding requirements.