NEC LCD8205-P Setup, Determine the installation location, Install the remote control batteries

Page 12

Setup

1. Determine the installation location

CAUTION: Installing your LCD display must be done by a qualified technician. Contact your dealer for more information.

CAUTION: IN ORDER TO AID IN MOUNTING, A LIFTING DEVICE MUST BE USED IN CONJUNCTION WITH THE ATTACHABLE EYEBOLTS.

MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY FOUR OR MORE PEOPLE. Failure to follow this caution may result in injury if the LCD monitor falls.

CAUTION: Do not mount or operate the display upside down, face up, or face down.

CAUTION: This LCD has a temperature sensor and cooling fan. If the LCD becomes too hot, the cooling fan will turn on automatically. If the LCD becomes overheated while the cooling fan is running, a “Caution” warning will appear. If the “Caution” warning appears, discontinue use and allow the unit to cool. Using the cooling fan will reduce the likelihood of early circuit failure and may help reduce image degradation and “Image Persistance”.

If the LCD is used in an enclosed area or if the LCD panel is covered with a protective screen, please check the inside temperature of the monitor by using the “HEAT CONTROL” control in the OSD (see page 20). If the temperature is higher than the normal operating temperature, please turn the FAN CONTROL to ON within the HEAT CONTROL menu within the OSD (see page 20).

IMPORTANT: Lay the protective sheet, which was wrapped around the LCD monitor when it was packaged, beneath the LCD monitor so as not to scratch the panel.

2. Install the remote control batteries

The remote control is powered by two 1.5V AAA batteries. To install or replace batteries:

A.Press and slide to open the cover.

B.Align the batteries according to the (+) and (–) indications inside the case.

C.Replace the cover.

CAUTION: Incorrect usage of batteries can result in leaks or bursting.

NEC recommends the following battery use:

Place “AAA” size batteries matching the (+) and (-) signs on each battery to the (+) and (-) signs of the battery compartment.

Do not mix battery brands.

Do not combine new and old batteries. This can shorten battery life or cause liquid leakage of batteries.

Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

Do not touch exposed battery acid, it may injure skin.

NOTE: If you do not intend to use the Remote Control for a long period of time, remove the batteries.

3. Connect external equipment (See pages 12-14)

To protect the external equipment; turn off the main power before making connections.

Refer to your equipment user manual for further information.

4. Connect the supplied power cord

The equipment should be installed close to an easily accessible power outlet.

Please fasten power cord to the LCD monitor by attaching the screw and clamp.

Fully insert the prongs into the power outlet socket. A loose connection may cause image degradation.

NOTE: Please refer to the “Safety Precautions and Maintenance” section of this manual for proper selection of AC power cord.

Clamp

English-10

Image 12
Contents MultiSync LCD8205 MultiSync LCD8205-P Index Declaration of conformity For USAFor Canada Important Information DeclarationDeclaration of the Manufacturer English-2Safety Precautions, Maintenance & Recommended Use Contents Installation Attaching Mounting Accessories Attach Mounting AccessoriesAttach eyebolts for mounting Ventilation RequirementsParts Name and Functions Control PanelTerminal Panel Wireless Remote Control Operating Range for the Remote ControlHandling the remote control Setup Determine the installation locationInstall the remote control batteries Connect the supplied power cordSwitch on the power of all the attached external equipment Adjust the soundAdjust the screen See Adjust the image SeeConnecting a Personal Computer ConnectionsBefore making connections Connect the LCD Monitor to a Personal ComputerConnecting a DVD Player with component out Connect the LCD Monitor to a DVD PlayerEnglish-13 Connecting a DVD Player with Hdmi out Connecting to a Stereo AmplifierEnglish-14 Power on and OFF Modes Basic OperationEnglish-15 Power Indicator Using Power ManagementPicture Size English-16OSD On-Screen-Display Controls English-17English-18 OSDEnglish-19 MTSEnglish-20 AUXConnection English-21Features English-22Troubleshooting Specifications Product SpecificationsEnglish-24 Pin Assignment English-25Manufacturer’s Recycling and Energy Information Disposing of your old NEC productEnergy Saving Weee Mark European Directive 2002/96/EC
Related manuals
Manual 2 pages 29.67 Kb

LCD8205-P specifications

The NEC LCD8205-P is an advanced large-screen LCD display specifically designed for professional multimedia applications. Recognized for its robust build and superior image quality, it finds its usage in corporate environments, educational institutions, and entertainment venues. This display, part of NEC’s extensive portfolio, provides users with a variety of features and technologies that enhance viewing experiences.

One of the primary characteristics of the LCD8205-P is its impressive display size of 82 inches, making it ideal for large audiences. The display supports high-definition resolutions, typically offering up to Full HD (1920 x 1080). This ensures that video presentations, graphics, and text appear sharp and vibrant, delivering exceptional clarity and detail.

The LCD8205-P incorporates advanced LED backlight technology that significantly improves brightness while reducing power consumption. This feature not only contributes to a lower overall operational cost but also promotes a more environmentally friendly solution. Moreover, the display boasts a wide viewing angle, allowing viewers to see the content from various positions without compromising image quality.

One of the standout technologies featured in the LCD8205-P is its integrated OPS (Open Pluggable Specification) slot. This allows for easy installation of a variety of PC modules, enhancing the display's capabilities for digital signage, presentations, or even interactive kiosks. Such modularity means users can upgrade their systems as technology evolves without needing to replace the entire display unit.

In terms of connectivity, the LCD8205-P offers an array of options, including HDMI, DisplayPort, and DVI inputs, accommodating a range of devices. Additionally, it includes USB ports for easy media playback and content management, ensuring seamless integration into existing setups.

The display is designed with user-friendly features such as a customizable menu system and remote management capabilities, making it convenient for IT departments to control multiple units across various locations.

Overall, the NEC LCD8205-P combines impressive physical characteristics with advanced technologies, making it an exceptional choice for anyone looking to invest in a large, high-quality display solution that delivers consistently outstanding performance.