Flexible Arm Installation, English-7

3. Place monitor face down on a non-abrasive surface (Figure M.3).

NOTE: Handle with care when monitor facing down, for avoiding the damage to the front buttons.

4.Remove the 4 screws connecting the stand to the monitor (Figure M.3).

5.Remove the stand (Figure M.4). The monitor is now ready for mounting in an alternate manner.

6.Connect the cables and place the connector cover on the back of the monitor.

7.Reverse this process to re-attach stand.

NOTE: Use only VESA-compatible alternative mounting method.

Handle with care when removing stand.

English

Figure M.3

Figure M.4

Flexible Arm Installation

This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm:

1.Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.

2.Use the 4 screws from the stand removal and attach the arm to the monitor (Figure F.1).

NOTE: The LCD monitor should only be used with an approved arm (e.g. GS mark). To meet the safety requirements, the monitor must be mounted to an arm, which guaranties the necessary stability under consideration of the weight of the monitor.

Thickness of Bracket (Arm)

2.0~3.2mm

4 Screws (M4)

(Max Depth: 18mm)

100mm

Weight of LCD assembly: 5.7kg (MAX)