NEC LCD2080UX+ Appendix, How to use the advanced menu, How to exit the advanced menu, English-15

Appendix

If you need detailed information about the controls, please use the advanced menu.

<How to use the advanced menu>

•Turn off your monitor.

•Turn on your monitor by pushing the “POWER” and “SELECT” button at the same time for at least one second simultaneously.

•You will see the Advanced menu.

This menu is larger than the normal OSM.

<How to exit the advanced menu>

•Turn off and restart your monitor in the normal way.

To make an adjustment, ensure that the tag is highlighted, then press “SELECT”.

To move to another tag, press “EXIT”, then press “ ” or “ ” to highlight another tag.

Tag1	Brightness			Adjusts the overall image and screen background brightness. Press “+” or “-” to adjust.
	Contrast			Adjusts the image brightness and contrast in relation to the background. Press “+” or “-” to
				adjust.
	Auto Contrast			Adjusts the image displayed for non-standard video inputs. Press “SELECT” to adjust.
	(Analog input only)			Any adjustment requires the image to have white portions.
	Auto Brightness			This function adjusts the brightness automaticaly for the best CONTRAST and
				BRIGHTNESS setting based on the white display area.
Tag2	R-H.position			Adjusts the position of the red component of the image. Press “+” or “-” to adjust.
	(Analog input only)
	G-H.position			Adjusts the position of the green component of the image. Press “+” or “-” to adjust.
	(Analog input only)
	B-H.position			Adjusts the position of the blue component of the image. Press “+” or “-” to adjust.
	(Analog input only)
	R-SHARPNESS			Adjusts the sharpness of the red component of the image. Press “+” or “-” to adjust.
	(Analog input only)
	G-SHARPNESS			Adjusts the sharpness of the green component of the image. Press “+” or “-” to adjust.
	(Analog input only)
	B-SHARPNESS			Adjusts the sharpness of the blue component of the image. Press “+” or “-” to adjust.
	(Analog input only)
Tag3	Signal			Determines when the auto adjustment is activated automatically.
	(Analog input only)			The choices are “OFF”, “SIMPLE” and “FULL”. Press “+” or “-” to select.
	SIGNAL			Input Signal			Adjustment Items
	setting		New		Re-input		H-size, Fine, H/V-Position		Contrast
	OFF		O		X		*		-
	SIMPLE		O		O		*		-
	FULL		O		O		*		*
	O: automatical adjustment is performed about the items filled *.
	X: automatical adjustment is not performed.
	Notice: Automatical adjustment dose not work at less than 800x600 resolution.
	Auto SW			Determines the automatic adjustment level for Auto Adjust. The choices are “SIMPLE”,
	(Analog input only)			“FULL” and “DETAIL”. Press “+” or “-” to select. Refer to the below table.
	Determines the automatic adjustment level as shown in the below table.
		Size, Fine, Position			Contrast	Black Level, Long cable capability*1			Time
	SIMPLE		O		X		X		1.5 seconds
	FULL		O		O		X		2 seconds
	DETAIL		O		O		O	10 to 20 seconds
	*1: Black level, RGB sharpness, RGB delay and RGB position are adjusted using “Long cable software” which is included in the attached CD-ROM.

English

English-15