NEC MD212MC manual AAPM-TG18

Achieve complete color and brightness uniformity. By nature, LCD panels contain uniformity errors, which are visible as slightly brighter or darker areas on the screen. To combat this inherent trait, each MultiSync MD212MC display is individually characterized during production using a fully automated system that measures multiple points across the screen at different gray levels. These measurements are used to build a 3-D correction matrix stored inside the display. This data is used to compen- sate for the uniformity not only as a function of position on the screen but of gray level as well. In turn, this tech- nology, called ColorComp, reduces the non-uniformity to virtually unnoticeable levels and applies a digital correction to each pixel on the screen to compensate for differences in color and luminance.

	50.0
	45.0
	40.0
	35.0
	30.0
	25.0					B e for e
						A fte r
	20.0
	15.0
	10.0
Ambient	5.0
light	0.0
	0	20	40	60	80	100

For optimal image viewing in any lighting condi- tion, the MD212MC’s built-in ambient light sensor can automatically adjust the calibration of the display to suit the environment.

For non-assisted conformance, calibration and reporting functions, a built-in remote sensor is capable of measuring monitor brightness, whitepoint and ambient lighting, while performing a quality check for DICOM conformance and contrast response.

The MD212MC’s design allows you to adjust the display to your exact ergonomic preferences. In addition to

tilt and swivel functionality, the height adjusts up to 150mm, and the display pivots between landscape to portrait orientations.

Model
	MultiSync MD212MC
Display	21.3"
Viewable Size Image
Pixel Pitch	0.27mm
Pixels Per Inch	94
Brightness (typical)	400 cd/m2 calibrated / 850 cd/m2 max
Contrast Ratio (typical)	1050:1
Viewing Angle (typical)	178° Vert., 178° Hor. (89U/89D/89L/89R)@ CR>10
Response Time (typical)	Rapid Response™ (20ms Gray-to-Gray)
Panel Bit Depth	12-bit internal LUTs, displays 16.7 million colors out of 68.5 billion
	color palette and 256 shades of gray out of 4096
Synchronization Range	31.5 - 91.1 KHz (Analog/Digital)
Horizontal
Vertical	50 - 85 Hz
Video Bandwidth	25.2 - 162 MHz (DualLink)
Input Signal	Analog RGB 0.7 Vp-p/75 Ohms
Video
Sync	Separate sync: TTL Level (Positive/Negative)
	Composite sync: TTL Level (Positive/Negative)
	Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)
Inputs	DVI-D, DVI-I and VGA 15-pin D-sub
Resolutions Supported (Analog/Digital)	640 x 400 @ 70-85 Hz*	1400 x 1050 @ 60-75 Hz
	720 x 400 @ 70-85 Hz	1440 x 900 @ 60 Hz
	640 x 480 @ 60-85 Hz	1600 x 1200 @ 60-75 Hz
	800 x 600 @ 56-85 Hz
	832 x 624 @ 75 Hz
	1024 x 768 @ 60-85 Hz
	1152 x 864 @ 70-85 Hz
	1152 x 870 @ 75 Hz
	1280 x 960 @ 60 Hz
	1280 x 1024 @ 60-85 Hz
Native Resolution	1600 x 1200 @ 60 Hz landscape / 1200 x 1600 @ 60 Hz portrait
Additional Features	Ultra-thin frame (bezel), VESA Mount, tilt, swivel, height-adjustable
	stand (5.9 in./150mm), pivot, vacation switch, 12-bit LUTs, black level
	adjustment, ColorComp uniformity correction, overdrive, Analog/Digi-
	tal CableComp™, GammaComp™ MD software, standalone calibration,
	DICOM GSDF calibration, front sensor with automatic backlight
	feedback system, AmbiBright ambient light sensor
Voltage Rating	AC 100-120V / AC 220-240V
Power Consumption (typical)	100W
On
Power Savings Mode	2W
Dimensions (WxHxD)	18.4 x 17.1 - 23 x 12 in. / 467.8 x 434.3 - 584.3 x 306mm
Net (with stand)
Net (without stand)	18.4 x 14.2 x 4.4 in. / 467.8 x 361.6 x 110.7mm
Net Weight	23.5 lbs. / 10.7 kg
(with stand)
(without stand)	16.5 lbs. / 7.5 kg
VESA Hole Configuration	100 x 100mm
Specifications
Environmental Conditions	5-35° C / 41-95° F
Operating Temperature
Operating Humidity	30-80%
Operating Altitude	3000m / 9842 ft.
Storage Temperature	-10-60° C / 14-140° F
Storage Humidity	10-85%
Storage Altitude	12,192m / 40,000 ft.
Safety Standards	UL/C-UL, UL60601-1, Gost/PCT, PSB, CCC, FCC Class B/Canadian
	DOC, C-tick, MPR II / MPR III, VCCI (class 2), JIS C 61000-3-2, static
	electricity guideline, low emission guideline, TUV-Ergonomie, US
	Mercury regulations, WEEE, RoHs, SASO, Energy Star 4.0 Tier 2,
	JEITA VOC Guideline. J-Moss, FDA 510k pending, CE-MDD Class 1,
	AAPM-TG18
Limited Warranty**	5 years parts and labor, including Advanced Overnight Exchange

* Analog only

** Backlight usage limited to 30,000 hours at 400 cd/m2 or less

MultiSync is a registered trademark, and ColorComp and GammaComp are trademarks of NEC Display Solutions. All other brand or product names are trademarks or registered trademarks of their respective holders. Product specifications subject to change. 1/09 Ver. 2.

©2009 NEC Display Solutions of America, Inc. All rights reserved.

NEC Display Solutions

500 Park Boulevard, Suite 1100

Itasca, IL 60143

866-NEC-MORE