5.Lift up the stand to unlatch the upper hooks and remove the stand (Figure S.3).
6.Remove the 2 screws on the top of the monitor (Figure S.4). The monitor is now ready for mounting in an alternate manner.
7.Connect the cables to the back of the monitor.
8.Reverse this process to
NOTE: Use only
Handle with care when removing stand.
English
Figure S.3 | Figure S.4 |
Flexible Arm Installation
This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm:
1.Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.
2.Using the 4 screws from the stand removal and attach the arm to the monitor (Figure F.1).
NOTE: The LCD monitor should only be used with an approved arm (e.g. GS mark). To meet the safety requirements, the monitor must be mounted to an arm, which guaranties the necessary stability under consideration of the weight of the monitor.
Thickness of Bracket (Arm)
2.0~3.2mm
4 Screws (4M)
(Max Depth: 14mm)
100mm
100mm | Weight of LCD assembly: 5.7 kg - LCD2070NX (MAX) |
| 5.8 kg - LCD2070VX (MAX) |
Figure F.1 | (Picture: LCD2070NX model) |
|