NEC LCD2090UXI user manual Troubleshooting

Page 19

Troubleshooting

No picture

•The signal cable should be completely connected to the display card/computer.

•The display card should be completely seated in its slot.

•Check the Vacation Switch should be in the ON position.

•Front Power Switch and computer power switch should be in the ON position.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

•Check the monitor and your display card with respect to compatibility and recommended settings.

•Check the signal cable connector for bent or pushed-in pins.

•Check the signal input, “DVI-D”, “DVI-I” or “D-Sub”.

•Ensure the DVI input mode is set to DIGITAL when the MAC digital output is connected to the DVI-I connector.

•If the front LED is blinking amber, check the status of the IPM mode (see page 11).

Power Button does not respond

•Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.

•Check the Vacation Switch on the left side of the monitor.

Image Persistence

•Image persistence is when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Message “OUT OF RANGE” is displayed (screen is either blank or shows rough images only)

•Image is displayed only roughly (pixels are missing) and OSM warning “OUT OF RANGE” is displayed: Either signal clock or resolution is too high. Choose one of the supported modes.

•OSM warning “OUT OF RANGE” is displayed on a blank screen: Signal frequency is out of range. Choose one of the supported modes.

Image is unstable, unfocused or swimming is apparent

•Signal cable should be completely attached to the computer.

•Use the OSM Image Adjust controls to focus and adjust display by increasing or decreasing the fine total. When the display mode is changed, the OSM Image Adjust settings may need to be readjusted.

•Check the monitor and your display card with respect to compatibility and recommended signal timings.

•If your text is garbled, change the video mode to non-interlace and use 60Hz refresh rate.

LED on monitor is not lit (no green, blue or amber colour can be seen)

•Power Switch should be in the ON position and power cord should be connected.

Picture is not as bright

•Make sure ECO MODE, AUTO BRIGHTNESS, and COLORCOMP is turned off.

•If the brightness fluctuates make sure AUTO BRIGHTNESS is turned off.

Display image is not sized properly

•Use the OSM Image Adjust controls to increase or decrease the Coarse total.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

No Video

•If no video is present on the screen, turn the Power button off and on again.

•Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).

Self Diagnosis

•The LCD display is equipped with the ability to self diagnose abnormalities. When the LCD detects a problem, the LED on the front flashes in a pattern of long and short blinks, depending on the type of problem detected.

•If the LED detects a problem, please refer service to qualified personnel.

English

English-17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents MultiSync LCD2090UXi SpectraView English-27 IndexEnglish-1 DeclarationEnglish-2 Canadian Department of Communications Compliance StatementDeclaration of Conformity FCC InformationContents English-4 Quick StartEnglish-5 Figure C.3Swivel Raise and Lower Monitor ScreenScreen Rotation TiltRemove Monitor Stand for Mounting Flexible Arm InstallationEnglish-7 Contrast ControlsBrightness/Contrast Controls BrightnessImage Controls Auto Adjust Analog input onlyTools Color Control SystemsMenu Tools OSM Warning Resolution NotifierFactory Preset InformationRecommended use Safety Precautions and MaintenanceEnglish-13 English-14 Cleaning the LCD PanelCleaning the Cabinet ErgonomicsEnglish-15 SpecificationsEnglish-16 FeaturesTroubleshooting English-18 How to use the advanced menuHow to exit the advanced menu AppendixEnglish-19 Ntaa SWZoom POS ZoomEnglish-20 English-21 English-22 English-23 Tile Comp OFF Tile Comp on TagB Date & TimeEnglish-24 English-25 Using the Auto Brightness functionEnglish-26 TCO’03 CongratulationsDisposing of your old NEC product Manufacturer’s Recycling and Energy Information
Related manuals
Manual 29 pages 606 b

2090UXI, 2090, LCD2090UXI specifications

The NEC LCD2090UXI is a notable entry in the realm of professional LCD monitors, specifically designed to cater to the needs of businesses and creative professionals. Offering superior image quality and a host of advanced features, the LCD2090UXI is engineered for high-performance applications in graphics design, video editing, and even medical imaging.

One of the standout features of the LCD2090UXI is its impressive 20.1-inch display size with a maximum resolution of 1600 x 1200 pixels. This resolution provides a significant workspace that is perfect for multitasking and enables detailed visual presentations. The display employs In-Plane Switching (IPS) technology, which ensures wide viewing angles and consistent color reproduction. This is crucial for professionals who rely on accurate color representation, as it minimizes color distortion when viewed from different angles.

The monitor supports a vibrant color gamut and can reproduce over 16 million colors, making it ideal for tasks that demand precise color fidelity. This feature is particularly beneficial for graphic designers and photographers who require a monitor that can display subtle nuances in color. Additionally, the LCD2090UXI has a fast response time, which helps in reducing motion blur, making it suitable for video playback and fast-paced graphics.

Another significant characteristic of the NEC LCD2090UXI is its ergonomic design, which includes height adjustment, tilt, and swivel functionalities. This is essential for users who spend long hours in front of the monitor, as it allows them to customize the viewing angle, promoting better posture and reducing eye strain. The monitor is also equipped with a built-in USB hub, which enhances connectivity by allowing users to connect multiple devices with ease.

The LCD2090UXI adheres to environmental standards, offering low power consumption and ENERGY STAR certification, making it a sound choice for eco-conscious consumers. It also features a comprehensive range of input options, including DVI-D and VGA inputs, providing flexibility in connectivity with various devices.

In summary, the NEC LCD2090UXI is a versatile and powerful LCD monitor that combines high-resolution display capabilities, advanced IPS technology, and ergonomic features. Its meticulous design caters to the specific needs of professional users in various fields, ensuring that they get the best performance and reliability from their display solutions.
Top Page Image Contents