NEC LCD1990SX user manual Ntaa SW, English-19

Tag3	Auto Adjust		Automatically adjusts the Image Position and H.Size settings and Fine settings.
	(Analog input only)	Press ÒSELECTÓ to activate Auto Adjustment.
	Signal Adjust	Determines when the auto adjustment is activated automatically.
	(Analog input only)	The choices are ÒSIMPLEÓ and ÒFULLÓ. Press ÒLeftÓ or ÒRightÓ to select.
				H-size, Fine, H/V Position		Contrast
			SIMPLE	O		X
			FULL	O		O
		O: Automatic Adjustment X: No Automatic Adjustment
		NOTE: Automatic Adjustment does not work at resolutions less than 800x600 resolution.
	Auto Adjust Level		Determines the automatic adjustment level for Auto Adjust. The choices are ÒSIMPLEÓ,
	(Analog input only)	ÒFULLÓ and ÒDETAILÓ. Press ÒLeftÓ or ÒRightÓ to select. Refer to the below table.
				Size, Fine, Position	Contrast		Black Level,	Time
							Long cable capability**
			SIMPLE	O		X	X	1 second
			FULL	O		O	X	1.5 seconds
			DETAIL*	O		O	O	5 seconds
		O: Automatic Adjustment X: No Automatic Adjustment
		* ÒDETAILÓ activates automatic long cable (skew, peaking) adjustment.
		** Black level, RGB sharpness, RGB delay and RGB position are adjusted using ÒLong cable softwareÓ
		which is included in the attached CD-ROM.
	A-NTAA SW	The Advanced No Touch Auto Adjust function is able to recognize new signals even when
	(Analog input only)	neither the resolution nor the refresh rate has changed. If several PCs are connected to
		the monitor, and each transmit very similar (or even the same) signals in terms of
		resolution and refresh rates, the monitor recognizes that there is a new signal and
		automatically optimizes the picture without the need for any action on the part of the user.
		OFF: A-NTAA is disabled.
		ON: If a change in signal is detected A-NTAA will adjust the monitor to the optimal settings
		for the new signal. If no change in the signal is detected then A-NTAA does not activate.
		The screen will be blank while the monitor optimizes the signal.
		OPTION: Functions the same as ON, except that the screen does not go blank when the
		monitor makes adjustments for changes in signal, allowing the monitor to display the new
		signal faster. When using an external switching device to connect 2 or more PCs to the
		monitor, using the ON or OPTION settings is suitable.
Tag4	H. Position		Controls Horizontal Image Position within the display area of the LCD.
		Press ÒLeftÓ or ÒRightÓ to adjust.
	V. Position	Controls Vertical Image Position within the display area of the LCD.
		Press ÒLeftÓ or ÒRightÓ to adjust.
	H. Size	Adjusts the horizontal size of the screen.
	(Analog input only)	If the ÒAUTO Adjust functionÓ do not give you a satisfactory picture setting, a further
		tuning can be performed using the ÒH.Size (V.Size)Ó function (dot clock). For this a MoirŽ
		test pattern could be used. This function may alter the width of the picture. Use left/Right
		Menu to center the image on the screen. If the H.Size (V.Size) is wrongly calibrated, the
		result would look like the left drawing. The image should be homogeneous.
	Fine	Improve focus, clarity and image stability by increasing or decreasing this setting.
	(Analog input only)	If the ÒAuto Adjust functionÓ and the ÒH.SizeÓ function do not give you a satisfactory
		picture setting, a fine tuning can be performed using the ÒFineÓ function. For this a MoirŽ
		test pattern could be used. If the Fine value is wrongly calibrated, the result would look
		like the left drawing. The image should be homogeneous.
	Auto Fine	This function automatically and periodically adjusts the ÒFINEÓ setting for change in signal
	(Analog input only)	condition. This function adjusts approximately every 33 minutes.
	H. Resolution	Adjusts the horizontal size by increasing or decreasing the setting.
		Press ÒRightÓ button to expand the width of the image on the screen.
		Press ÒLeftÓ button to narrow the width of the image on the screen.
	V. Resolution		Adjusts the vertical size by increasing or decreasing the setting.
		Press ÒRightÓ button to expand the height of the image on the screen.
		Press ÒLeftÓ button to narrow the height of the image on the screen.
	Expansion	Sets the zoom method.
		FULL: The image is expanded to 1280 x 1024, regardless of the resolution.
		ASPECT: The image is expanded without changing the aspect ratio.
		OFF: The image is not expanded.
		CUSTOM: When CUSTOM is selected as the Expansion mode, it becomes possible to
		adjust the H. ZOOM., V. ZOOM, and ZOOM POS.

English

English-19