NEC LCD3210 manual Troubleshooting

Page 34

Troubleshooting

No picture

•The signal cable should be properly connected to the display card/computer.

•The display card should be properly seated in its slot.

•Front Power Switch and computer power switch should be in the ON position.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

•Check the monitor and your display card with respect to compatibility and recommended settings.

•Check the signal cable connector for bent or pushed-in pins.

Power Button does not respond

• Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.

Image persistence

•Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, necdisplay recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.

Image is unstable, unfocused or swimming is apparent

•Signal cable should be properly attached to the LCD monitor, computer, or other input device.

•Use the OSM screen controls to focus and adjust display by increasing or decreasing the clock phase total. When the display mode is changed, the OSM Image Adjust settings may need to be readjusted.

•Check the monitor and your display card with respect to compatibility and recommended signal timings.

•If your text is garbled, change the video mode to non-interlace and use 60Hz refresh rate.

Image of component signal is greenish

• Check to see if the DVD/HD input connector is selected.

LED on monitor is not lit (no green or red color can be seen)

•Main Power Switch should be in the ON position and power cord should be connected.

•Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).

Red LED on monitor is blinking

• A certain failure might have occurred, please contact your nearest authorized necdisplay service facility.

Display image is not sized properly

•Use the OSM screen controls to increase or decrease the clock total.

•Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.)

Selected resolution is not displayed properly

•Use OSM information to enter Information menu and confirm that the appropriate resolution has been selected. If not, select appropriate resolution.

No Sound

•Check to see if speaker cable is properly connected.

•Check to see if mute is activated.

•Check to see if volume is set at minimum.

Remote Control is not available

•Test the Remote Control’s batteries for strength/life.

•Check if the batteries are inserted correctly.

•Check if the Remote Control is pointed at the monitor’s remote sensor.

The remote control system may not function when direct sunlight or strong illumination strikes the remote control sensor of the LCD monitor, or when there is an object in the path.

“SCHEDULE” / ”OFF TIMER” functions not working properly

•The “SCHEDULE” function will be disabled when the “OFF TIMER” is set.

•If the “OFF TIMER” function is enabled and the power to the LCD monitor is turned off or if the power supply is interrupted unexpectedly,then the OFF TIMER will be reset.

English

English-33

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Manuel Utilisateur Index ConnectionsImportant Information Canadian Department of Communications Compliance StatementRecommended Use Safety Precautions and MaintenanceErgonomics Contents Lay the screen face down To prevent use of Main Power SwitchAttaching LCD Options To prevent the LCD Monitor from falling downParts Name and Functions Control PanelAC in connector Audio in 1,2,3 AV Terminal PanelWireless Remote Control PIP Picture In Picture button AVOperating Range for the Remote Control Handling the remote controlSetup Procedure Installing and removing stand Recommended AdjustmentsWhen the monitor is installed in the portrait position How to use the attached speaker plug AVWiring Diagram Before connecting external equipment to LCDConnections Connecting the LCD Monitor to a PC Connecting to a Macintosh Computer Connections -ontinuedConnecting to a Computer with a Digital Output Connecting to a DVD Player AV Connecting to a Stereo Amplifier AV Using the remote control Pressing the power buttonPressing the Main Power Switch Basic Operation OSM On-Screen Manager Controls-Picture Control PanelOSM Controls-Screen TintResolution OSM Controls-AudioOSM Controls-Configuration1 OSM Controls-Configuration2 Screen SaverOSM Position OSM Controls-Advanced option Advanced OSM Controls-NOTE Using the LCD with a Personal Computer PC Using the LCD with a Personal Computer Input S-VIDEOUsing the LCD with a Personal Computer Features Troubleshooting References Specifications Product SpecificationsLCD3210Pin Assignment Digital RGB Input DVI-D R G BLimited Warranty Declaration of the Manufacturer Declaration of Conformity

LCD3210 specifications

The NEC LCD3210 is a remarkable display designed to meet the growing demands of professional environments such as command and control centers, medical facilities, and high-end graphic design studios. This 32-inch LCD monitor offers an impressive blend of advanced technologies and user-friendly features, making it an excellent choice for critical applications.

One of the standout features of the NEC LCD3210 is its superb image quality. It boasts a native resolution of 1920 x 1080 pixels, delivering vivid and sharp images with excellent detail. The display employs advanced panel technologies that enhance brightness and contrast, providing a remarkable visual experience. With a brightness level of up to 450 cd/m² and a contrast ratio of 1000:1, users can enjoy consistent and vibrant colors, ensuring that images and graphics are accurately represented.

In terms of connectivity, the NEC LCD3210 is impressively versatile. It comes equipped with multiple input options including HDMI, DVI-D, VGA, and component video. This flexibility allows users to connect the monitor to a wide variety of devices, making it suitable for numerous applications. Additionally, the ability to handle different resolutions and aspect ratios means that no matter what content is being displayed, the LCD3210 can manage it with ease.

Another noteworthy aspect of the NEC LCD3210 is its ergonomic design. The monitor supports various height, tilt, and swivel adjustments, enabling users to position it for maximum comfort and accessibility. This is particularly beneficial in environments where long hours of use are common, reducing the risk of eye strain and promoting a healthier workspace.

To enhance usability, the NEC LCD3210 incorporates energy-efficient technologies that contribute to lower power consumption without compromising performance. This means organizations can enjoy high-quality displays while keeping operational costs in check.

Overall, the NEC LCD3210 is a powerful 32-inch LCD monitor that combines cutting-edge technology and ergonomic design. Its high-resolution display, versatile connectivity options, and energy-efficient features make it a top choice for professionals who demand reliability and quality in their visual solutions. Whether for graphic design, monitoring, or any other high-stakes application, the NEC LCD3210 stands out as a dependable and high-performing display solution.
Top Page Image Contents