NEC LCD2010X manual Quick Start

Page 5

Quick Start

To attach the MultiSync® LCD monitor to your system, follow these instructions:

1.Turn off the power to your computer.

2.For the PC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws.

For the PC with Analog output: Connect the 15-pin mini D-SUB to DVI signal cable to the connector of the display card in your system (Figure A.2).

To connect a secondary PC with analog output, connect the 15-pin mini D-SUB to 15-pin mini D-SUB signal cable (not included) to the connector of the display card in your system.

For the MAC: Connect the MultiSync Macintosh cable adapter to the computer, then attach the 15-pin mini D-SUB signal cable to the MultiSync Macintosh cable adapter (Figure B.1).

NOTE: Some Macintosh systems do not require a Macintosh cable adapter.

NOTE: To obtain the MultiSync Macintosh cable adapter call NEC-Mitsubishi Electronics Display of America, Inc. at (800) 820-1230

3.Remove connector cover. Connect the DVI signal cable to the connector on the back of the monitor. Connect the 15-pin mini D-SUB signal cable (not included) to the connector on the back of the monitor. Place the video signal cable (Figure C.1).

NOTE: Incorrect cable connections may result in irregular operation, damage display quality/ components of LCD module and/or shorten the module’s life.

4.Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet (Figure C.1).

5.Turn on the monitor (Figure D.1) and the computer.

6.To complete the setup of your MultiSync LCD monitor, use the following OSM™ controls:

•Auto Adjust Contrast (Analog input only)

•Auto Adjust (Analog input only)

Refer to the Controls section of this User ’s Manual for a full description of these OSM controls.

NOTE: For download information on the Windows® 95/98 INF file for your MultiSync LCD2010X monitor, refer to the References section of this User’s Manual.

NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.

NOTE: Refer to User ’s Manual in the NEC LCD Setup Software CD case for installation and operation of this software.

Using headphones

1.Connect the audio cable to “Line-in” on the back of the monitor and the other end to the “Audio out” terminal of the computer. Replace connector cover.

2.Headphones may be connected to the “Headphones” output on the right side of the monitor (Figure E.1). Headphones can be purchased from your local electronics store.

3

2010X.wpc

5

7/13/00, 5:01 PM

Page 4 Page 6
Image 5
Page 4 Page 6
Contents MultiSync Index FCC Information Canadian Department of Communications Compliance StatementContents Quick Start Figure A.1 Figure C.1 Screen Rotation Raise and Lower Monitor ScreenRemove Monitor Stand for Mounting Tilt and SwivelAdjusts the overall image and background screen brightness Auto Adjust Analog input onlyControls Brightness/Contrast ControlsAutomatically adjusts H. Size and Fine settings Image Adjust Controls Analog Input OnlyAccuColor Control Systems ToolsLanguage OSM control menus are available in seven languages Digital DVI digital input is availableOSM Warning InformationRecommended Use Safety Precautions and MaintenanceRecommended Use Monitor MultiSync LCD2010X Specifications SpecificationsFeatures Features Troubleshooting 978 ReferencesFastFacts Information 630 Literature & Sales Info NEC-INFO 800 MultiSync FulfillmentLimited Warranty Brominated flame retardants TCO’95Sweden TCO’99 Why do we have environmentally labelled computers?LH-20S01 What does labelling involve?Mercury LeadCadmium Declaration of the Manufacturer Informations FCC AvertissementVotre produit peut être enregistré sur Internet à l’adresse ContenuMettez l’ordinateur hors tension Mise en marche rapideMise en marche rapide suite Cordon d’alimentation Rotation de l’écran Utilisation d’un écouteurLever et baisser l’écran du moniteur Enlever le support du moniteur pour le montage Incliner et pivoterCommandes de luminosité/contraste CommandesCommandes de position Entrée analogique uniquement Réglage Auto Entrée analoqique uniquementRéglage image Commandes suiteSystème de contrôle des couleurs AccuColor OutilsSimultanément OutilsLangage Les menus de l’OSM sont disponibles en sept langues Avertissement Osmmc Consignes de sécurité et d’entretien Usage recommandéErgonomie Usage recommandé suiteFiche technique Fonctions Fonctions suite Pas dimage Dépannage’interrupteur d’alimentation ne fonctionne pas Persistance de l’imagePas de vidéo Dépannage suiteLimage n’a pas la bonne taille Informations FastFactsMC 630 RéférencesInfo docum. & vente NEC-INFO 800 Téléventes 800Garantie limitée LH-20S01-BK TCO’95Pourquoi des ordinateurs «éco-étiquetés»? Qu’est-ce qu’implique l’éco-étiquetage?Plomb TCO’95 suiteMercure Hydrocarbures chlorofluorés fréonRetardateurs de flamme TCO’99Suède TCO’99 suiteDéclaration du fabricant Déclaration DE Conformité Informationen der FCC Federal Communications Commission WarnungLieferumfang Den Computer ausschalten Quick StartAbbildung B.1 Quick Start / FortsetzungAbbildung A.1 Abbildung A.3 Abbildung E.1 Abbildung C.1Höher- und Tieferstellen des Monitorbildschirms Kopfhörer verwendenDrehen des Bildschirms Abbildung RL.1Abnehmen des Monitorfußes zu Montagezwecken Kippen und SchwenkenHelligkeits-/Kontrastregler BedienungselementeBildanpassungsregler nur Analogeingang Positionsregler nur AnalogeingangAccuColor Control System WerkzeugeBedienungselemente / Fortsetzung Information Vorsichtsmaßnahmen und Wartung Empfehlungen für die VerwendungEmpfehlungen für die MultiSync Remarques Technische DatenLCD2010X Monitor Technische DatenFunktionen OSM Display Screen Copyright 2000, NEC-MITSUBISHI Funktionen / FortsetzungKein Bild FehlerbehebungFastFacts-Information 630 VerweiseTele-Vertrieb 800 Dokument NrBeschränkte Gewährleistung Umweltkriterien Warum haben wir umweltzertifizierte Computer?Worum geht es bei der Zertifizierung? TCO’95 / Fortsetzung Entflammungsverzögerer Kadmium BleiQuecksilber FCKWs FreoneErklärung des Herstellers Konformitätserklärung Declaration of Conformity

LCD2010X specifications

The NEC LCD2010X is a high-performance LCD monitor designed to meet the demands of professional users who require exceptional clarity, reliability, and versatility. This model, featuring a 20.1-inch screen size, is particularly well-suited for various applications, including graphic design, video editing, and office use, making it a popular choice among different industries.

One of the standout features of the NEC LCD2010X is its impressive display quality. With a resolution of 1600 x 1200 pixels, the monitor offers a clear and sharp image that enhances user experience and productivity. The 16:10 aspect ratio provides a wider viewing area, allowing users to multitask efficiently and view multiple documents or images side-by-side.

The LCD2010X utilizes advanced LCD technologies, including a high-quality IPS (In-Plane Switching) panel. This technology ensures superior color accuracy and consistency across wide viewing angles, making it ideal for tasks that require precise color reproduction. With a wide color gamut, the monitor is capable of displaying vibrant colors that are true to life, an essential feature for graphic designers and other creative professionals.

In terms of connectivity, the NEC LCD2010X offers multiple input options, including DVI-D and VGA ports, ensuring compatibility with a variety of computers and devices. The monitor also features built-in speakers, providing an all-in-one solution for users who require audio output without the need for external speakers.

An additional advantage of the LCD2010X is its ergonomic design. The monitor boasts height, tilt, swivel, and pivot adjustments, allowing users to customize the viewing angle for comfort and reduced eye strain during long working hours. This flexibility promotes a healthier workspace environment, essential for professionals who spend extended periods in front of their screens.

Furthermore, the NEC LCD2010X is designed with energy efficiency in mind. It incorporates several eco-friendly features that help reduce power consumption, contributing to lower operational costs and a smaller carbon footprint.

In summary, the NEC LCD2010X is a versatile and high-quality LCD monitor that excels in performance, display capabilities, and ergonomic design. Its array of features, including a high-resolution display, IPS technology, extensive connectivity options, and energy efficiency, make it a compelling choice for professionals seeking reliability and visual excellence in their work.
Top Page Image Contents