| Factory Preset | Selecting Factory Preset allows you to reset all OSD control settings back to the factory |
|
| settings. Highlighting the control to be reset and pressing the RESET button can reset |
|
| individual settings. |
|
|
|
Tag6 | Language | OSD control menus are available in eight languages. Press ÒLeftÓ or ÒRightÓ to select. |
|
|
|
| OSD LEFT/RIGHT | You can choose where you would like the OSD control image to appear on your screen. |
|
| Selecting OSD Location allows you to manually adjust the position of the OSD control |
|
| menu left or right. |
|
|
|
| OSD DOWN/UP | You can choose where you would like the OSD control image to appear on your screen. |
|
| Selecting OSD Location allows you to manually adjust the position of the OSD control |
|
| menu up or down. |
|
|
|
| OSD Turn off | The OSD control menu will stay on as long as it is use. You can select how long the |
|
| monitor waits after the last touch of a button to shut off the OSD control menu. The preset |
|
| choices are |
|
|
|
| OSD Lock Out | This control completely locks out access to all OSD control functions. When attempting |
|
| to activate OSD controls while in the Lock Out mode, a screen will appear indicating the |
|
| OSD controls are locked out. |
|
| There are three types of OSD LOCK OUT: |
|
| OSD LOCK OUT with BRIGHTNESS and CONTRAST control: To activate the OSD Lock |
|
| Out function, press SELECT, then ÒUPÓ button and hold down simultaneously. To |
|
| deactivate the OSD Lock Out, press SELECT, then ÒUPÓ button and hold down |
|
| simultaneously while in the OSD menu. BRIGHTNESS and CONTRAST can be adjusted |
|
| while in the lock out mode. |
|
| OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT, |
|
| then ÒRightÓ button and hold down simultaneously. To deactivate the OSD Lock Out, press |
|
| SELECT, then ÒRightÓ button and hold down simultaneously while in the OSD menu. |
|
| No controls can be adjusted while in the lock out mode. |
|
| OSD LOCK OUT with BRIGHTNESS (only) control: To activate the OSD Lock Out |
|
| function, press SELECT, then ÒDownÓ and ÒLeftÓ buttons and hold down simultaneously. |
|
| To deactivate the OSD Lock Out, press SELECT, then ÒDownÓ and ÒLeftÓ buttons and hold |
|
| down simultaneously while in the OSD menu. BRIGHTNESS can be adjusted while in the |
|
| lock out mode. |
|
| CUSTOM: Press RESET and EXIT to enter the CUSTOM Menu. Select ENABLE or |
|
| DISABLE for POWER KEY, INPUT SEL, BRIGHTNESS, CONTRAST, ECO MODE, |
|
| WARNING. To Deactivate the OSD Lock Out function, press RESET and EXIT to bring up |
|
| the LOCK OUT warning. |
|
| Press SELECT, SELECT, <, >, <, >, EXIT. |
|
|
|
| Hot Key | When this function is activated; the brightness and contrast of the monitor can be adjusted |
|
| without entering the OSD menu by using the front buttons. |
|
| The ÒLeftÓ or ÒRightÓ buttons adjust the brightness level. |
|
| The ÒDownÓ or ÒUpÓ buttons adjust the contrast level. |
|
|
|
| Signal Information | Signal information can be displayed in the corner of the screen. |
|
| Signal information is either ÒOn/OffÓ. |
|
|
|
Tag7 | Information | Provides information about the current display resolution Technical data, including the |
|
| preset timing currently being used and the horizontal and vertical frequencies is also |
|
| displayed. |
|
| CARBON SAVINGS: Display the estimated carbon saving information in kg. |
|
| The carbon footprint factor in the carbon saving calculation is based on the OECD |
|
| (2006 Edition). |
|
|
|