NEC A900 user manual When viewing the middle of the screen

Page 10

Recommended Use cont.

CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR:

Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward

when viewing the middle of the screen.

• Position your monitor no closer than 12 inches and no further away than 28 inches from your eyes. The optimal distance is 18 inches.

Rest your eyes periodically by focusing on an object at least 20 feet away. Blink often.

Position the monitor at a 90° angle to windows and other light sources to minimize

glare and reflections. Adjust the monitor tilt so that ceiling lights do not reflect on your screen.

If reflected light makes it hard for you to see your screen, use an anti-glare filter.

Clean your monitor regularly. Use a lint-free, non-abrasive cloth and a non-alcohol, neutral, non-abrasive cleaning solution or glass cleaner to minimize dust.

Adjust the monitor’s brightness and contrast controls to enhance readability.

Use a document holder placed close to the screen.

Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize turning your head while you are typing.

Get regular eye checkups.

Ergonomics

To realize the maximum ergonomics benefits, we recommend the following:

Adjust the Brightness until the background raster disappears

Do not position the Contrast control to its maximum setting

Use the preset Size and Position controls with standard signals

Use the preset Color Setting and Sides Left/Right controls

Use non-interlaced signals with a vertical refresh rate between 75-160Hz

Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue due to insufficient contrast

For more detailed information on setting up a healthy work environment, call NEC at (800) 820-1230, NEC FastFactsinformation at (800) 366-0476 and request document #900108 or write the American National Standard for Human Factors Engineering of Visual Display Terminal Workstations – ANSI-HFS Standard

No. 100-1988 – The Human Factors Society, Inc. P.O. Box 1369, Santa Monica, California 90406.

8

78133961.MultiL

10

9/10/98, 12:03 PM

Image 10
Contents MultiSync Index Références Garantie limitéeCanadian Department of Communications Compliance Statement FCC InformationContents Quick Start Figure A.1Computer Resets the highlighted control to the factory setting AdjustmentControls Tools Safety Precautions and Maintenance Recommended UseWhen viewing the middle of the screen Specifications Monitor MultiSync A900 SpecificationsFeatures Troubleshooting FastFacts Information 800 References978 Literature & Sales Info NEC-INFO 800 MultiSync FulfillmentLimited Warranty Röntgenstrahlung Avertissement Informations FCCContenu Mise en marche rapide Câble de Signal captif Ordinateur Commandes Commandes de luminosité/contrasteOutils Usage recommandé Consignes de sécurité et de maintenanceUsage recommandé Caractéristiques techniques Fonctions Limage est floue ou les couleurs semblent brouillées Pas dimageLimage défile ou est instable Limage danse ou une trame onduleuse est présente sur limageInformations FastFactsMC 800 RéférencesSite internet ftp Ftp.nectech.com World Wide Web Info docum. & vente NEC-INFO 800 Obligations MultiSyncGarantie limitée Röntgenstrahlung Déclaration DE Conformité Declaration of Conformity