NEC FP2141SB manual Size and Position Controls, Color Control/AccuColor Control System, Tools

Page 8

Controls –continued

Size and Position Controls

Auto Adjust: Automatically adjust the horizontal and vertical size and position settings for the applicable timing signal.

NOTE: Auto Adjust is unavailable with no image signal or narrow size of image signal input.

Left/Right: Moves the image horizontally (left or right).

Down/Up: Moves the image vertically (up or down).

Narrow/Wide: Decreases or increases the horizontal size of the image.

Short/Tall: Decreases or increases the vertical size of the image.

Color Control/AccuColor® Control System

Color presets 1 through 5 selects the desired color setting. The bar is replaced by the color setting choice from 1, 2, 3, sRGB, 5. Each color setting is adjusted at the factory to the stated Kelvin degrees. If a setting is adjusted, the name of the setting will change from Kelvin to Custom. NOTE: sRGB does not allow you to adjust each color.

Red, Green, Blue: NEC’s AccuColor Control System decreases or increases the monitor’s red, green or blue color guns depending upon which is selected. The change in color will appear on screen and the direction (decrease or increase) will be shown by the bars.

NOTE: sRGB does not allow you to control the AccuColor, Brightness and Contrast.

Geometry Controls

Geometry Controls Menu

The Geometry controls allow you to adjust the curvature or angle of the sides of your display. In/Out (pincushion): Decreases or increases the curvature of the sides either inward or outward.

Left/Right (pincushion balance): Decreases or increases the curvature of the sides either to the left or right.

Tilt (parallelogram): Decreases or increases the tilt of the sides either to the left or right.

Align (trapezoidal): Decreases or increases the bottom of the screen to be the same as the top.

Rotate (raster rotation): Rotates the entire display clockwise or counterclockwise.

Corner Correction: Allows you to adjust the geometry of the corners of your display — Top, Top Balance, Bottom or Bottom Balance.

Tools 1

Moiré Canceler: Moiré is a wavy pattern which can sometimes appear on the screen. The pattern is repetitive and superimposed as rippled images. When running certain applications, the wavy pattern is more evident than in others. To reduce moiré, adjust the level by using the

–/+ CONTROL buttons.

Convergence: Aligns all three colors (R,G,B) to form a single color (white). The purpose of this control is to ensure that a white line drawn on the screen is as crisp and clear as possible.

•Use the CONVERGENCE (HOR.) control to adjust the alignment of the white lines in the left/right direction.

•Use the CONVERGENCE (VER.) control to adjust the alignment of the white lines in the up/down direction.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Page Index Canadian Department of Communications Compliance Statement FCC InformationContents Quick Start Figure A.1Figure C.1 Controls Brightness/Contrast ControlsSize and Position Controls Color Control/AccuColor Control SystemGeometry Controls Geometry Controls MenuAll stages of energy savings are utilized Information Safety Precautions and Maintenance Recommended UseAdjust the monitor height so that the top Recommended Use Specifications Monitor MultiSync FP2141SB SpecificationsFeatures Features Troubleshooting Check the inputted signal Self check functionReferences Limited Warranty Why do we have environmentally labelled computers? TCO’95MultiSync FP2141SB Black Front Model What does labelling involve?Lead CadmiumMercury CFCs freonsTCO’99 MultiSync FP2141SB Silver Front ModelTCO’99 Declaration of the Manufacturer Page Avertissement Informations FCCContenu Mise en marche rapide Figure B.1Mise en march rapide suite Commandes Commandes de luminosité/contrasteCommandes suite Commandes de format et de positionCommandes du menu Géométrie OutilsLangage Les menus de l’OSM sont disponibles en six langues Signal » Usage recommandé Consignes de sécurité et d’entretienUsage recommandé suite MénagementErgonomie Fiche technique 024 x 768 @ 50 à 160 Hz 280 x 1 024 @ 50 à 127 HzFonctions Dépannage Dépannage suite Références Techform.htmGarantie limitée MultiSync FP2141SB Modèle frontal de couleur noir Pourquoi des ordinateurs «éco-étiquetés»?Qu’est-ce qu’implique l’éco-étiquetage? Exigences environnementalesTCO’95 suite PlombCadmium MercureMultiSync FP2141SB Modèle frontal de couleur argent Retardateurs de flammeTCO’99 suite Déclaration du fabricant Série Flat Enterprise NEC Page Warnung Informationen der FCC Federal Communications CommissionLieferumfang USB-Kabel BenutzerhandbuchNetzkabelDen Computer ausschalten Quick Start -fortsetzung Bedienungselemente Helligkeits-/KontrastreglerBedienungselemente -fortsetzung Größen- und PositionsreglerColor Control / AccuColor Control System Geometrie-EinstellungenWerkzeuge Information Empfehlungen für die Verwendung Vorsichtsmaßnahmen und WartungFortsetzung Empfehlungen für die Verwendung Technische Daten Technische Daten Monitor Hinweis MultiSync FP2141SBFunktionen Fehlerbehebung Fehlerbehebung -fortsetzung Referenzen Beschränkte Gewährleistung MultiSync FP2141SB, Modell mit schwarzer Front Warum haben wir umweltzertifizierte Computer?Worum geht es bei der Zertifizierung? UmweltkriterienBlei Entflammungsverzögerer Blei KadmiumQuecksilber FCKWs FreoneErklärung des Herstellers Page Page Konformitätserklärung Declaration of Conformity

FP2141SB specifications

The NEC FP2141SB is a notable CRT (cathode ray tube) monitor that was designed to cater to both professional and personal computing needs during its era. This monitor exhibited remarkable features and advanced technologies that set it apart from many of its contemporaries.

One of the key highlights of the NEC FP2141SB is its impressive display size of 21 inches, which provided users with ample screen real estate for various applications, from graphics design to data analysis. The monitor also boasted a maximum resolution of 1600 x 1200 pixels, allowing for crisp and clear images. This high resolution was particularly beneficial for professionals who required precise visual detail for tasks such as CAD (computer-aided design) and image editing.

The FP2141SB utilized a Flat Square Tube (FST) design, which minimized distortion and provided a more uniform screen surface. This technology ensured that images retained their sharpness and clarity across the entire monitor, reducing glare and enhancing viewing comfort. The monitor further incorporated a high refresh rate of 85 Hz, which reduced flicker and eye strain, making it suitable for extended use.

In terms of color performance, the NEC FP2141SB featured a 24-bit color depth that offered a wide color gamut, rendering vivid and accurate colors. This was particularly advantageous for tasks requiring precise color representation, such as graphic design and photo editing.

The monitor’s ergonomic design included adjustable tilt and swivel options, allowing users to customize their viewing angles for optimal comfort. The FP2141SB also provided multiple input options, ensuring compatibility with various computer systems.

NEC’s commitment to environmental sustainability was evident in the FP2141SB as well, with features that focused on reduced power consumption and compliance with energy efficiency standards.

Overall, the NEC FP2141SB represented a well-rounded solution for users seeking a high-performance monitor. Its blend of advanced technologies, exceptional color accuracy, and ergonomic features made it a popular choice for professionals and avid users alike. Although CRT technology has since been surpassed by LCD and LED displays, the FP2141SB remains a significant example of the innovation present in early computer displays.
Top Page Image Contents