NEC E3100 manual Overview, Technician Notes, Disassembly Instructions, Reassembly Instructions

Page 3

Overview

This document contains step-by-steps disassembly instructions for VERSA E3100 notebook. The instructions explained how to remove or disassemble a particular part with the help of photos. The size of the screws in used is display on the right side of the guide.

NEC reserves the right to make any changes to this disassembly guide without notice.

Technician Notes

Only technician/engineer authorized by NEC Computer Asia Pacific should attempt to repair this equipment. All troubleshooting and repair procedures are display to allow subassembly/module level repair. Because of the complexity of the individual boards and subassemblies, no one should attempt to make repairs at the component level or to make modifications to any printed wiring board. Improper repairs can create a safety hazard. Any indication of component replacement or printed wiring board modifications may void any warranty or exchange allowances.

Disassembly Instructions

When disassembling the system, follow these general rules:

„Do not disassemble the system into part smaller than illustrated by this manual.

„Label all removed connectors. Note where the connector goes and what position it originally installed.

„Disconnect the system from the power adaptor.

Reassembly Instructions

Reassembly is the reverse of the disassembly process. Correct size and type of screw need to reinstall back. Check that no tools or any loose parts left inside the chassis. Check that everything properly installed and all screw tightened.

Required Tools

All disassembly procedures can be perform using the following tools:

„PH 0x60 Philips screwdriver

„PH 0x40 Philips screwdriver

„SW5.0 Spacer screwdriver

„Flat screwdriver

„Small tweezers

„Pin

NEC VERSA E3100 Disassembly Manual

Page 3

Image 3
Contents Versa E3100 Table of contents Technician Notes Disassembly InstructionsReassembly Instructions OverviewPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge NEC Versa E3100 Disassembly Manual Removing the battery Removing the BatteryRemoving the memory and wireless LAN module Removing the Memory and Wireless LAN ModuleRemoving the Hard disk drive cover Removing the Hard Disk DriveReleasing the optical drive Removing the Optical Disk DrivePull the ODD module out from the base unit as shown in Fig Releasing the keyboard cover Removing the KeyboardTurn the system over, remove another screw as shown in Fig Removing the LCD Module Pushing the Wireless LAN cable to the front of the systemGentle removes the LCD module Removing the rubber covers & screws on the LCD Module Removing the LCD PanelTo remove the LCD, remove the 4 screws as shown in Fig Uninstalling the switch board Removing the Switch Board ModuleRemoving a screw and 3 cables Removing the Top Cover AssemblyRemove all the 14 screws Removing the Main Board Removing screws and the connectors on the main boardSlowly lift up the main board as shown in Fig Removing the CPU Removing the screws and fan connectorRemoving the Touch Pad Removing the MDC ModemRemoving the Bluetooth Module Removing the Speaker AssemblyScrews Versa E3100 Disassembly Manual

E3100 specifications

The NEC E3100 represents a significant advancement in enterprise-class servers, engineered to meet the demands of modern data centers. With a focus on performance, scalability, and reliability, the E3100 is an optimal choice for organizations looking to enhance their IT infrastructure.

One of the main features of the NEC E3100 is its advanced processing power. Equipped with the latest multi-core processors, it delivers exceptional performance for a wide range of applications, from virtualized environments to data-intensive workloads. This server supports high memory configurations, allowing for more efficient data processing and improved multi-tasking capabilities. Its architecture is designed to handle heavy workloads while ensuring minimal latency, making it ideal for mission-critical applications.

The E3100 also incorporates cutting-edge storage technologies. With flexible storage options, organizations can configure their systems according to their specific needs. The server supports both traditional hard drives and solid-state drives, providing the opportunity for optimized performance through tiered storage solutions. This flexibility allows businesses to strike a balance between cost and speed, enhancing overall data access and storage efficiency.

Networking capabilities are another highlight of the NEC E3100. It boasts high-speed Ethernet connectivity that meets the requirements of modern networking demands. The server is equipped with multiple network interfaces that provide redundancy and load balancing, ensuring continuous availability and high throughput for networked applications.

In terms of manageability, the NEC E3100 features advanced monitoring tools and a user-friendly interface. IT administrators can easily oversee and manage system operations, receive alerts on potential issues, and perform remote configurations. This proactive management capability not only reduces downtime but also simplifies maintenance tasks considerably.

Moreover, the E3100 emphasizes energy efficiency, aligning with the growing trend toward sustainable IT practices. With optimized power consumption and thermal management technologies, this server minimizes energy usage while maximizing performance. This focus on efficiency not only lowers operating costs but also contributes to a company’s environmental sustainability goals.

In summary, the NEC E3100 stands out as a robust server solution that caters to the evolving needs of enterprises. With its powerful processing capabilities, flexible storage options, advanced networking features, and management tools, it is tailored for organizations seeking reliability, efficiency, and scalability in their IT operations. The combination of these characteristics makes the NEC E3100 a pivotal asset in any forward-thinking business environment.