I do not know the hexadecimal format of my WEP key
•Go to another device on your network and note the selections for key and number of bits.
•40/64 bit keys contain five alphanumeric characters
(0 through 9, A through F) and 128 bit keys contain ten.
•If your network uses a passphrase, refer to the documentation that came with your access point.
Setup was not successful (My printer was not found on the network)
•Verify the network status of your computer’s wireless adapter. If the network is not active, you did not reconnect to the network. Click Back to return to the previous screen.
•Verify the IP address of the computer is valid. If the IP address was reset to 0.0.0.0 when the computer was switched from an infrastructure network with DHCP to an Ad hoc network, you may need to reconfigure your computer’s wireless adapter. For help, refer to the documentation that came with your computer’s wireless adapter.
•If the computer appears on the network, but the printer does not, go to Step 9: “Set up your printer adapter on the network” on page 6, and repeat the install process.
•If you can see the LexmarkN5 network using the wireless search feature, it is likely the printer adapter never connected with your network. Go to Step 9: “Set up your printer adapter on the network” on page 6, and repeat the install process.
27 | Troubleshooting |