Lexmark Z82 manual General Printing Problems, Select File Default Printer

Page 91

Chapter9

General Printing Problems

Selecting the Default Printer

If you did not select this printer as the default, you’d better select it as the default printer before attempting to print a document.

To set the default printer, proceed as follows:

1)Select Start ➝ Settings ➝ Printers from the Windows task bar.

2)Double-click the Lexmark Z82 icon.

3)Select File ➝ Default Printer.

Problem

 

Cause & Solution

 

 

 

The printer does not

●

Check if the power cord is plugged in.

print

●

The printer cable is not connected properly.

 

●

The printer cable is defective. Check the cable

 

 

and replace it, if necessary.

 

●

The printer port is configured incorrectly.

 

 

Check Pinter Setting in Windows to make sure

 

 

that the print job is being sent to the correct

 

 

port (for example, LPT1).

 

●

A paper jam has occurred. Remove the jammed

 

 

paper.

 

●

This printer is not selected as the default.

 

 

Check the default printer.

 

●

The printer driver may be incorrectly installed.

 

 

Remove the existing printer driver, and re-install

 

 

the printer driver.

 

 

 

Printer prints, but no

●

Make sure the tape is removed from the

characters appear

 

printhead.

 

 

See 'Installing the Print Cartridges' on page 2-10

 

 

for more information.

 

●

Check the print cartridges to be sure they are

 

 

correctly installed. See 'Installing the Print

 

 

Cartridges' on page 2-10 for more information.

 

●

Check to see if the print cartridge ink is low or

 

 

empty.

 

●

Make sure print media is loaded in the printer.

 

 

 

Chapter9

9-7

Troubleshooting 9-7

Page 90 Page 92
Image 91
Page 90 Page 92
Contents Page United States Government Restricted Rights Supplemental Information Warranty Service Electronic Emission Notices Safety Information Contacting Lexmark Introduction Using the Control Panel Making a Copy Maintaining Your Printer Appendix Overview IntroductionAbout This Guide Main Features Printer Components Universal Serial Bus USB Port Manual Feeder Power Connector Rear CoverMemo Setting Up Your Printer User’s Guide Power CordSmarThru 2 Guide Setting Up Your Printer Onnecting the Printer Cable Setting Up Your Printer USB cable connection Onnecting the Power Cord Oading Paper into the Input Tray Setting Up Your Printer Nstalling the Print Cartridges Press Enter/Select Installing the Print Cartridge Right CARTRIDGE? appears Press Enter/Select Left CARTRIDGE? appears in the displayAlign Cartridge ❿15 00-30 a To change the alignment value Cartridge type Part numberEsting the Printer Press Setup until Maintenance appears in the displaySmarThru 2 program Printer software printer driverSmarThru 2 provides you with Software Requirements Hardware RequirementsInstalling the printer software Click Install Printer Software Choose the Setup type and click the Next button Adding a New Fax Modem Setting up your Internet Connection Congratulations Software 26Setting Up Your Printer Using the Control Panel Button Function Ontrol Panel ButtonsPress Special Copy to Status Message Ontrol Panel DisplayPrint Media Edia Size Media DimensionPrint Media Characteristics Not supported paper types Aper GuidelineUsing the Manual Feed Slot 6Print Media Printing Tasks Click Printer and select Set as Default Setting Your Default PrinterElecting the Printer Printing a Document Starting the Lexmark Z82 Control Program Using the Status TabSelect Start Programs Lexmark Z82 Printer Control Using the Options Tab Using the Cartridges Tab Select Printer Properties Using Features in the Printer DriverPaper Size Paper TabPaper Source CopiesDocument Types Document/Quality TabPaper Types Print QualityHalftone Advanced TabImage Making a Copy Aking a Single Copy Making Multiple Copies To change Copy Contrast Hanging Copy SetupLowest reduction percentage Enlarges the original to the highestEnlargement percentage Reduces the original document toOllated Copying Making a Clone Copy Press the Special Copy button until Poster Copy appears Rinting PostersChanging Printer Settings Electing the Paper Size Paper Type appears Selecting the Paper Type87-4Changing Printer Setting Maintaining Your Printer Eplacing the Print Cartridges Ligning the Print Cartridges Leaning Your Printer Clean the printheadsTo wipe the printheads Rinting the Help List Restoring the Menu to the Default Setting Djust Shading Press Enter/Select again when prompted by are YOUTroubleshooting Paper jams while the printer is feeding Learing Paper JamsPaper jams while printing Tips for Avoiding Paper Jams Error Messages Stop/Restore button Error MessagesSelect File Default Printer General Printing ProblemsPaper does not feed Print Quality Problems Change the Print Quality to High or Normal Entire page is whiteScanning Problems Problem Cause & Solution Scanning Problems Unrecognized words CR ProblemsPecifications SpecificationPrinter Copier Index Appendix OCR Twain UI

Z82 specifications

The Lexmark Z82 is a versatile and powerful inkjet printer designed to cater to diverse printing needs, making it an ideal choice for both home and small office environments. This model stands out due to its capacity for high-quality color printing, rapid print speeds, and effective technology that enhances efficiency.

One of the notable features of the Lexmark Z82 is its ability to produce vivid color images and sharp text. The printer boasts a maximum print resolution of up to 4800 x 1200 dpi when using Lexmark's high-resolution photo ink cartridges. This capability allows users to create stunning photos and detailed graphics with brilliant color depth and clarity, making it a great choice for printing everything from reports to family pictures.

The Z82 is also recognized for its impressive print speed. It can print up to 20 pages per minute (ppm) for black and white documents and around 10 ppm for color documents, driving productivity for users who require efficiency. This speed does not compromise the quality; each print is crisp and clear, making it suitable for both professional presentations and personal projects.

In terms of technology, the Lexmark Z82 incorporates advanced features such as SmartSolve technology which helps users troubleshoot issues quickly, and a user-friendly interface, facilitating easy navigation through various functions. Moreover, the printer supports both USB and parallel connectivity options, allowing it to integrate seamlessly with multiple types of workstations and laptops.

Another significant characteristic of the Z82 is its economical operation. The use of individual ink cartridges means that users can replace only the color that runs out, reducing waste and lowering overall printing costs. Additionally, the printer's energy-efficient design helps minimize environmental impact without sacrificing performance.

The Lexmark Z82 has proven to be reliable over time. With its durable construction and longevity, the printer can withstand the rigors of regular use, making it a smart investment for those seeking performance without constant maintenance. With its combination of speed, quality, and cost-efficiency, the Lexmark Z82 continues to be a favored choice for various printing tasks. Whether used for everyday documents or vibrant color prints, the Z82 meets the dynamic needs of users while maintaining an excellent standard of performance.
Top Page Image Contents