Copying, Setting the Paper Type, Making a copy

3Squeeze the width guide tabs together as shown, and slide the width guide to the correct position for the paper size being loaded.

Note: Notice the load line label on the side of the tray which indicates the maximum stack height for your paper.

4Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on a level surface.

5Load the paper stack with the recommended print side faceup. Load the stack toward the back of the tray as shown.

When loading preprinted letterhead, place the header toward the front of the tray.

6Align the tray, and insert it.

Setting the Paper Type

1Make sure the printer is on and Select Function appears.

2From the printer control panel, press System.

3Press or repeatedly until Tray Settings appears, and then press OK.

4Press or repeatedly until the desired tray appears, and then press OK.

5Press or repeatedly until Paper Type appears, and then press OK.

6Press or repeatedly to select the desired paper type, and then press OK.

7Press repeatedly until Select Function appears.

Copying

Making a copy

1Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.

Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.

2If you are loading a document into the ADF, adjust the paper guides.

3From the printer control panel, press Copy.

4Use the keypad to enter the number of copies.

5To change the color mode, press Color Mode until the light comes on next to the selection you want. Choose between B&W (black and white) and Color.

6Adjust the copy options.

7Press Start to begin copying.

Notes:

•To cancel the copy function, press Stop at any time.

•Print jobs are interrupted when users make copies. Printing continues while the printer scans the originals. When the copies are ready to print, the print job pauses, the copies print, and then the print job resumes. Copies cannot be made while printing a received fax.