Lexmark C544N/DN/DW/DTN, X546DTN MFP manual Electrical specifications, Power requirements

Page 18

Electrical specifications

Printer model

C54x low voltage models*

C54x 100 volt model

C54x high voltage models

X546dtn MFP low voltage models

X546dtn MFP high voltage models

Electrical specification

100–127 V at 47–63 Hz, nominal 90–137 V, extreme

100 V at 47–63 Hz, nominal 90–110 V, extreme

220–240 V at 47–63 Hz (not available in all countries) 198–259 V, extreme

100–110 V (Japan) at 50–60 Hz, nominal 100–127 V at 50–60 Hz, nominal 90–110 V (Japan), extreme

90–137 V, extreme

220–240 V at 50–60 Hz, nominal (not available in all countries) 198–264 V, extreme

* Using a 220–110 power converter with 110 V printer is not recommended.

Warning—Potential Damage: Lexmark recommends that you do not use voltage converters with printers.

Power requirements

The following tables list the nominal average power requirements (including fuser power).

Lexmark C54x nominal average power requirements

Printing states	C540n, C543dn

Average power while printing continuously

C544n, C544dn, C544dw, C544dtn

1-sided (simplex)

2-sided (duplex)

480W

340W

500W

340W

Average power while idle

Power Saver on

Ready mode

Max current while printing

18W

34W

18W

36W

100–110 V 110–127 V 220–240 V

8.7A

7.6A

4.1A

8.7A

7.6A

4.1A

Note: Automatic duplex is not supported on the C540n and C544n.

Printer specifications

18

Image 18

Contents C540n, C543dn, C544n/dn/dw/dtn, X546dtn MFP Technical ReferenceEdition notice Contents Index 102 Introduction OverviewUnderstanding letters after model numbers Acronym Meaning Learning about the printe r Finding information about the printerPrinter Co ntro l Language PC L page fo rmattin g Printable areasSupported paper and envelope dimensions JIS B5Printer Control Language PCL page formatting PJL commands information Printer Job Language PJLPostScri pt PS e mulatio n Paper sizes supportedPostScript paper tray support Tray selected with tray operatorsPostScript envelope size support Envelope sizes supportedPostScript envelope tray support Literal names supportedEnvelopetray operator selections Printer specif ications Airflow requirementNoise emission levels Electrical specifications Power requirementsPhysical specifications Lexmark X546dtn MFP nominal average power requirementsAltitude specifications and atmospheric pressure Clearance requirementsEnvironmental conditions Atmospheric Pressure PCL emulation commands Append ix a PC L suppor tSet Page Size ESC&l#Mb Paper Type Secondary Font Symbol Set Logical Operation ESC*r#U Simple Color GL/2 commands Appendix a PCL support Appendix a PCL support Appendix a PCL support Append ix B PJL support Common variables for both printer languagesAppendix B PJL support Lexmark-unique PJL variables for both printer languages Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Common variables for PCL emulation Printer-unique variables for PCL emulationCommon variables for PostScript emulation Printer-unique variables for PostScript emulationStatus Readback commands Printer-unique Lresource variablesUstatus unsolicited status variables PJL messages for auto-continuable conditions Configuration Change, some Held jobs were Not restored Serial Disabled Unformatted Insert Box M Not enough Installed PJL messages for attendance conditionsInsert Hole Close Deflector Cover Open CMYK* Cartridge Tray x or Disks installed Low Empty Cmyk Check Duplex Box nearly full Color pc unit Replace PC Yellow Photoconductor Abnormal Reload printed PJL messages for paper handling Exposure Change source PJL messages for paper jams Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Appendix B PJL support Service errors Lexmark-unique PJL commandsDevice attendance messages File and device protection commands Lqueryseed Append ix C PostScript su p po rt Supplemental operatorsAppendix C PostScript support Appendix C PostScript support Device parameters IET Appendix C PostScript support Appendix C PostScript support User interpreter parameters System interpreter parameters Appendix C PostScript support Appendix C PostScript support Devices supported LPRA% LPRB% LPRC% LPRD% USBA% USBB% USBC% USBD% Appendix C PostScript support Appendix C PostScript support Appendix C PostScript support DelayedOutputClose Enabled Filtering HasNames PortLocation Type Device Parameters for the Parameters Device %Engine% Appendix C PostScript support 100 PostScript message keys commands Index Lresource103