Telex NEO-10 technical manual RS-232 Port, Ethernet Port, Relay/Input Ports

Page 4

4

2 Connecting NEO to the World

NEO has a total of three different ports that are used to connect it to the world. Likely, the first port that will need to be connected is the RS-232 port.

2.1 RS-232 Port

The RS-232 port is used for initial setup purposes only. It is a standard DCE pinout allowing a straight through DB9 cable to connect it to a computer or other terminal device for setup. Default baud rate is 19200,N81.

2.2 Ethernet Port

The Ethernet Port is used for setup of the NEO as well as for its operation from the consoles. Control of its relays is handled through this port. The NEO sends multicast packets whenever status of one of its relays or inputs changes allow for all users of the device to see real time changes in parallel. The port supports both 10 and 100 Mbps operation of standard Cat 5 cable.

2.3 Relay/Input Ports

There are 10 RJ45 ports that are used to sense inputs and control external events. Each connector is connected to a DPDT relay. Both sets of poles are brought out

to the connector allowing for two separate

1 2 3 4 5 6 7 8

1)

Relay1 N/O

circuits to be controlled by a single relay. Figure

 

 

 

 

 

 

 

 

 

 

 

2)

Relay1 Common

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3)

Relay1 N/C

1 shows the pin out of the rear RJ45s. “Relay1”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4)

GND

designates the pins on one half of the DPDT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5)

INPUT

relay and “Relay2” the other half. The relays are

 

 

 

 

 

 

 

 

 

 

 

6)

Relay2 N/C

rated for 1 Amp at 125VAC. The GND signal is

 

 

 

 

 

 

 

 

 

 

 

7)

Relay2 Common

the signal ground of the device. The INPUT pin

 

 

 

 

 

 

 

 

 

 

 

8)

Relay2 N/O

is a diode blocked input that allows sensing of a

 

 

 

 

 

 

 

 

 

 

 

Connector View

logic signal. The input range is 0-18 volts.

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 1-NEO RJ-45 Connector Pinout

 

 

Exceeding the limits of either the Input or the

 

 

Relays is a violation of the warranty. The

manuals of the various Vega VoIP consoles should be consulted for programming the user interface buttons to control the relays and sense the inputs of the NEO-10.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Technical Manual Table of Contents Introduction Ethernet Port RS-232 PortRelay/Input Ports Software Configuration of NEO Setting the basic IP information with HyperterminalPage Page General Setup via Web Pages Basic Ethernet Setup ScreenBasic Ethernet Setup Screen Multicast Setup Multicast Port Number SetupDebounce Input Settings Input Debounce SettingsEcho Packet RouterEcho Packet Setup Clone From Other NEO Clone from Other NEOPIN Change Set PIN NumberSave Changes to Eeprom Save to EepromBill of Material and Schematics PCB ASSY, NEO-10 QTY RES Optional Do not Place TC7S32FU Page Page Page Page Warranty, Service, Repair, and Comments

NEO-10 specifications

The Telex NEO-10 is a cutting-edge intercom solution designed for professional audio communications in broadcasting, film production, and live event environments. Renowned for its robust performance and innovative features, the NEO-10 offers users an all-encompassing audio management system that enhances operational efficiency and connectivity.

One of the standout features of the Telex NEO-10 is its flexibility in configuration. The system supports both wired and wireless communication, allowing users to choose the mode that best fits their specific needs. This adaptability is facilitated by a user-friendly interface, which simplifies the setup process and ensures that team members can connect quickly and easily, regardless of location.

The NEO-10 boasts advanced digital signal processing (DSP) technology, which ensures high-quality audio transmission with minimal latency. This is crucial in live production environments where real-time communication is vital. The system also features advanced noise-canceling capabilities, reducing background noise and enhancing clarity during critical communications.

Another significant characteristic of the NEO-10 is its scalability. Whether deployed for small teams or large productions, the system can be easily expanded by adding additional units or integrating with existing intercom infrastructure. This ensures that as production needs grow, the NEO-10 can evolve accordingly without necessitating a complete overhaul of the communication setup.

The device also emphasizes user comfort and ergonomics. The lightweight design combined with intuitive controls allows operators to utilize the NEO-10 for extended periods without discomfort. Additionally, the system supports various audio formats, ensuring compatibility with a wide array of audio sources and equipment.

Furthermore, the Telex NEO-10 is engineered for durability, making it suitable for demanding environments. Its rugged build ensures it can withstand the rigors of professional use, whether in a studio, on a film set, or at live events.

In summary, the Telex NEO-10 is an innovative intercom solution that excels in flexibility, audio quality, scalability, and user-centric design. With its advanced technologies and characteristics, it stands out as an essential tool for professionals seeking reliable and effective communication in demanding audio environments.
Top Page Image Contents