Oki VK2000 instruction manual Semiconductor, System Requirement, Hardware Configuration

Semiconductor VK2000

3.SYSTEM REQUIREMENT

•IBM PC/AT or 100% compatible

•Windows 95/98® operating system

•Pentium® CPU 133MHz min. (166MHz or above recommended)

•16 MB working memory (32MB or more recommended)

•10MB free hard disk space

•VGA monitor 640 x 480 pixels, 256 colours min.

•Mouse

4.HARDWARE CONFIGURATION

	Power Switch		Volume L (VR1)
	Reset Switch		Volume R (VR2)
Control	RS232C			Speaker L (3.5mmØ)
Software				Speaker R (3.5mmØ)
				Line-in (for future use)
	Host PC			Microphone (3.5mmØ)
		VK2000 Board

If you use one speaker make sure to plug it into the LEFT speaker jack. The right speaker output is for MSM9841 mode only.

5. SOFTWARE INSTALLATION AND REMOVAL

Control software for VK2000 comes on two floppy disks. Insert disk 1/2 and select SETUP.EXE from the Program Manager. Double click and simply follow the instructions of the setup program. The soft- ware can be uninstalled using the Windows control panel (Add/Remove Programs).

NOTE: If you need to re-install the software, please first uninstall any previous version using the Win- dows control panel (Add/Remove Programs).

Page 2/11