Emerson 30-130KVA specifications General Specifications, Npower Matching Battery Cabinet

Liebert has re- invented the

LIEBERT NPOWER™ 3-PHASEUPS: 30-130KVA, 60 HZ, 208 OR 480VAC

double-conversion UPS. The Npower is the result of an international design collaboration and more than a decade of advanced research.

Every aspect of the Npower shows careful design and attention to detail. The rugged powertrain and advanced ActiveStar™ controls were subjected to computer simulations and thermal analysis to ensure reliable performance in every environment.

Even the physical packaging is uniquely efficient, to make fully configured systems more compact than other products on the market.

Best of all, it’s a Liebert product— designed to give the same million- hour critical bus MTBF as its older brothers.

•Unmatched heritage of reliability and availability

•Smallest system footprint

•Excellent efficiency with non- linear loads and partial loads

•Outstanding dynamic response

•All-digital ActiveStar™ controls and graphical user interface

General Specifications

INPUT

Voltage	208 or 480VAC, 60 Hz
	3-phase, 3- or 4-wire plus ground
Voltage Range	+10, -15%
	(no battery discharge at -20%)
Frequency Range	60 Hz, ±5
Current Distortion	10% maximum reflected THD at full load with
	optional input filter; 30% THD without filter
Current Limit	115% of full load input current
Current Walk-in	20 seconds to full load
Power Factor	0.80 lagging minimum at full load; up to 0.96
	lagging at full load with optional input filter
Surge Protection	Sustains input surges without damage, per
	criteria listed in ANSI C62.41-1980 (IEEE 587)
ENVIRONMENTAL
Operating	UPS: 32° to 104°F (0-40°C)
Temperature	Battery: 68° to 86°F (20-30°C)
Non-Operating Temp.	-4° to 158°F (-20° to 70°C)
Relative Humidity	0-95% non-condensing
Operating Altitude	Up to 6600 ft. (2000m) without derating
Acoustical Noise	Less than 65 dBA typical, measured
	3.3 ft. (1m) from the unit
OUTPUT
Voltage	208 or 480VAC
	3-phase, 4-wire plus ground
Voltage Adjustment	±5%
Range
Voltage Regulation	±0.5% for balanced load
	±1.0% for 100% unbalanced load
Dynamic Regulation	±5% deviation for 100% load step
	±1% for loss or return of AC input
Transient Response	Recover to ±1% of steady state within 1 cycle
Time
Voltage Distortion	For linear loads, 1% THD; less than 2.5% THD
	for 100% nonlinear loads w/o kVA/kW derating
Phasing Balance	120° ±0.5° for balanced load.
	120° ±1° for 100% unbalanced load
Frequency	±0.1%
Regulation
Load Power	1.0 to 0.7 lagging without derating
Factor Range
Overload	125% of full load for 10 minutes
	150% for 1 minute w/ true sinusoidal waveform

STANDARDS

ETL listed to UL 1778 UPS standards and CSA certified. Meets current requirements for safe high performance UPS operation.

Npower Matching Battery Cabinet

	Run Time (minutes) for kVA:							Dimensions	Weight
Model	30	40	50	65	80	100	130	WxDxH, in. (mm)	lb. (kg)
1FJ	12	7	-	-	-	-	-		1,600 (725)
1HJ	21	14	10	7	5	-	-	25x32.5x71	1,800 (815)
1LJ	28	20	14	8	5	-	-		2,350 (1,065)
								(635x825x1800)
1MJ	36	25	18	12	8	5	-		2,350 (1,065)
1PJ	53	38	28	20	15	10	-		3,000 (1,360)
1PJ(130)	-	-	-	-	-	-	7		3,350 (1,520)
1RJ	62	45	34	25	19	13	9	49x32.5x71	3,700 (1,680)
1UJ	72	52	39	30	23	17	12	(1250x825x1800)	4,000 (1,815)
1WJ	104	74	55	40	33	25	16		5,050 (2,290)
2PJ	126	83	67	50	38	28	-	(2) 25x32.5x71	6,000 (2,720)
								635x825x1800)
2PJ(130)	-	-	-	-	-	-	20		6,700 (3,040)
2RJ	144	104	76	55	45	35	25	(2) 49x32.5x71	7,400 (3,360)
2UJ	156	111	90	67	52	40	30	(1250x825x1800)	8,000 (3,630)
2WJ	-	-	-	97	74	55	40		10,100 (4,580)
3PJ	204	145	108	78	63	48	-	(3) 25x32.5x71	9,000 (4,080)
								635x825x1800)
3PJ(130)	-	-	-	-	-	-	35		10,050 (4,560)
3RJ	223	161	129	94	72	54	39	(3) 49x32.5x71	11,100 (5,040)
3UJ	265	187	142	105	81	65	48	(1250x825x1800)	12,000 (5,445)
3WJ	421	302	217	157	124	94	69		15,150 (6,870)
4PJ	301	206	154	111	90	68	-	(4) 25x32.5x71	12,000 (5,440)
								(635x825x1800)
4PJ(130)	-	-	-	-	-	-	50		13,400 (6,080)
4RJ	329	224	182	134	102	77	55	(4) 49x32.5x71	14,800 (6,720)
4UJ	377	266	201	147	111	91	67	1250x825x1800	16,000 (7,260)
4WJ	480	423	320	222	180	135	97		20,200 (9,160)

Maintenance Bypass Cabinets

	Dimensions	Weight, lb. (kg) for kVA:
Model	WxDxH, in. (mm)	30-50	65-80	100-130
L or N	25x32.5x71	660 (299)	750 (340)	800 (363)
	(635x825x1800)
P or Q	31.7x32.5x71	1,210 (549)	1,320 (599)	1,540 (699)
	(805x825x1800)

Slim-Line Distribution Cabinet

	Dimensions	Weight
kVA	WxDxH, in. (mm)	lb. (kg)
All	10x32.5x71	250 (113)
	(254x825x1800)