Oki 87 warranty Safety Information, Installation Hints, Operation and Maintenance

Safety Information

Installation Hints

•Install your OKIOFFICE 87 MFP in a dust-free location away from direct sunlight.

•Do not plug your MFP into a power source shared by equipment which produces electrical noise (i.e., air conditioners, etc.).

•Leave electronic adjustments to authorized service personnel.

•The LINE terminal connects your fax machine to a standard telephone line. To avoid damage to your telephone system or to the MFP, do not plug your fax machine into anything other than a standard RJ-11C jack.

•Your MFP is intended to be grounded electrically and is equipped with a three-wire grounded power cord. For your safety, do not attempt to defeat your power cord’s grounding plug.

•The power outlet should be located near the equipment and should be easily accessible.

•The TEL port on the back of the unit is only suitable for 2-wire devices. Not all standard telephones will respond to incoming ringing when connected to an extension socket.

•This equipment may not necessarily provide for the effective hand-over of a call from a telephone connected to the same line.

Operation and Maintenance

•Use a dry cloth to clean the control panel and the main body of the unit.

•Aside from replacing the toner and image drum car- tridge, do not disassemble or attempt to service this unit yourself. Refer to a qualified technician for service.

•Disconnect the power cord before trying to remove any objects that may have fallen into the machine.

•When relocating your MFP, always disconnect the telephone line before disconnecting the power cord, then reconnect the power cord first.

Warranty, Regulatory Information, and Specifications 13