Emerson 7ADTB manual Electrical Operation, Operate, This switch

Page 6

INSTALLATION (continued)

GREEN

RED

operate

 

 

this switch

observe these lights

GREEN RED AMBER

Figure 1-3. Standard controls and indicators.

2 – Electrical Operation

This procedure checks electrical operation of the ADTS.

Close enclosure door before proceeding to prevent personal injury in case of electrical system fault.

Transfer Test

The ATS should still be bypassed. Both normal and emergency sources must be available and the emergency source generator (if used) must be capable of being started; put engine starting control in automatic position. The Transfer Switch Connected to Normal light and the Normal Source Accepted light should be on.

1.Turn the Isolation Handle counterclockwise to the TEST position.

NOTE: The engine generator may be signalled to start while turning the Isolation Handle. If emergency source is available, the ATS may operate to the emergency position. If it does, operate Retransfer Delay Bypass switch.

2.Perform steps 1–5 at right. Observe the status lights. See Figure 1–3.

■Black square means light is on.

❐White square means light is off.

3.Turn the Isolation Handle clockwise to the CONN (connected) position.

4.Turn Bypass Handle clockwise to the OPEN position.

This completes the Functional Test of the 7ADTB.

Turn and hold Transfer Control switch clockwise to Transfer

1Test until the engine starts and runs (within 15 sec.). The Emergency Source Accepted light should come on.

Transfer switch CN opens and the Transfer Switch Connected

2to Normal light should go off and the Load Disconnect Active light should come on. Both CN & CE contacts are now open.

After the delay transition time delay, the CE Transfer switch will operate to the Emergency

3position. The Transfer Switch Connected To Emergency light should come on and Load Dis- connect Active light goes off.

Transfer switch will operate back to Normal position after Feature 3A time delay. For im- mediate retransfer turn Transfer

4Control counterclockwise to Retransfer Delay Bypass. The Transfer Switch Connected To Normal light should come on; Transfer Switch Connected to Emergency light should go off.

The engine–generator will stop after the Feature 2E time delay

5(unloaded running engine cool- down). The Emergency Source Accepted light should go off.

Load

Disconnect

Active

Load

Disconnect

Active

Load

Disconnect

Active

Load

Disconnect

Active

Load

Disconnect

Active

1---4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Table of Contents Rating LabelCatalog Number Identification Standard Controls Indicators Group ControllerNameplate 600Installation SectionAuxiliary Circuits When normal sourceEngine Starting Contacts FailsGo off. Then put the starting Control selector switch on Voltage ChecksObserve these lights Electrical Operation This switchTurn and hold Transfer Control switch clockwise to Transfer OperateTesting & Service Replacement PartsTable B. Trouble-Shooting Checks Contact position indicators= C = ONormal Load Disconnected = OBypassing the ATS Bypass SwitchBypassing & Isolating Upper amber lightTurn PushBypass Handle Turn it Counter Clockwise Bypass Handle Clock WiseMiddle amber light Should be on Turn crank Counter Clockwise Until Window ShowsIsolating the ATS Lower amber lightContact Inspection Tab Handles Left rail Right railReturn to Service Turn crank Clockwise Until Window ShowsMiddle amber light Should come on Conn Bypass Handle Clockwise Bypass Handle Counter ClockwiseTurn the handle clockwise Turn the handle counterclockwise Index See Controller User’s Guide

7ADTB specifications

The Emerson 7ADTB is a cutting-edge device designed primarily for temperature and pressure monitoring in industrial applications. This versatile model showcases a blend of advanced technologies that ensure high accuracy, reliability, and durability even in the most demanding environments.

One of the key features of the Emerson 7ADTB is its exceptional measurement range. Capable of handling extreme temperatures and pressures, it appeals to industries such as oil and gas, chemical processing, and pharmaceuticals. The device is engineered to maintain precise readings, ensuring optimal safety and efficiency in processes where temperature and pressure control is crucial.

A standout technology in the Emerson 7ADTB is its intelligent sensor technology. This advanced feature allows the device to self-calibrate and adapt to various conditions, minimizing human error and ensuring accurate data collection. It uses built-in diagnostics to monitor its performance continuously, providing real-time alerts for any anomalies or maintenance needs. As a result, users can implement preventive measures to avoid costly downtimes.

The device is also notable for its robust construction. Built to withstand harsh industrial environments, the Emerson 7ADTB boasts an IP67 ingress protection rating, meaning it is dust-tight and can endure immersion in water. This characteristic, combined with high-grade materials, ensures a long lifespan and reliable performance in various applications, from offshore platforms to refining facilities.

Integrating seamlessly into existing systems is another crucial aspect of the Emerson 7ADTB. It supports a variety of communication protocols, including Modbus and HART, allowing for easy integration with control systems. This compatibility facilitates real-time data monitoring and control, enabling operators to make informed decisions based on accurate and timely information.

Moreover, the user-friendly interface of the Emerson 7ADTB enhances operational efficiency. The device features an intuitive display that allows users to access data, adjust settings, and perform diagnostics with ease, reducing the learning curve for new operators.

In conclusion, the Emerson 7ADTB represents a significant advancement in temperature and pressure measurement technology. With its robust construction, intelligent sensor capabilities, and ease of integration, it meets the demands of modern industrial applications while ensuring safety, reliability, and performance. As industries continue to evolve, devices like the Emerson 7ADTB will play a pivotal role in enhancing operational efficiency and productivity.
Top Page Image Contents