Philips C70, C50 manual Selecting a desired track, Programming Tracks, Reviewing the program

Page 15

15

CD

•If you wish to change the inner disc during playback, press DISC CHANGE again.

ª“DISC CHANGE" will be displayed.

ªThe CD will stop playing.

ªThe CD carousel tray will close to

retrieve the inner CD and then open again with the inner CD accessible.

3Press OPEN•CLOSE to close the CD carousel tray.

Selecting a desired track

Selecting a desired track when playback is stopped

1Press ’ or ‘ until the desired track appears on the display.

2Pressƒ to start playback.

ªThe selected track number and elapsed playing time appear on the display.

Selecting a desired track during playback

•Press ’ or ‘ until the desired track appears on the display.

ªThe selected track number and elapsed playing time appear on the display.

•If you press ’ once it will skip to the beginning of the current track and play the track again.

Note:

–Pressing’ during shuffling can only skip to the beginning of the current track.

Searching for a particular passage during playback

•Press and hold ˆ or ‡ until the desired passage is located.

ª The volume will be reduced.

•Play returns to normal when ˆ or

‡ is released.

Programming Tracks

Programming tracks of a loaded CD is possible when playback is stopped.The display will indicate the total tracks stored in the program. Up to 40 tracks can be stored in the memory in any order.When 40 tracks are stored and you attempt to store another track, the display will show “FULL”.

1Load the desired discs in the disc trays.

2Press PROG to start programming.

ªThe PROGRAM starts flashing.

ªIt will cancel any previously selected repeat mode.

3Press the CD (CD 1•2•3) or DISC 1/2/3 button to select the disc.

4Press ’ or ‘ to select the desired track.

5Press PROG to store the track.

•Repeat steps 3 to 5 to store other discs and tracks.

6Press ‚ once to end programming.

ªThe total number of tracks programmed and total playing time appear on the display.

Notes:

–If the total playing time is more than “99:59“ or if one of the programmed tracks has a number greater than 30, then “--:--” appears on the display instead of the total playing time.

–If the system is reading the disc, programming is not possible, “READING” will be displayed and followed by "DISC X" "X" is the current read disc number.

–During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically.

Reviewing the program

Reviewing of the program is possible only when playback is stopped.

•Press ’ or ‘ repeatedly to review the programmed tracks.

•Press ‚ once to exit review mode.

Playing the program

1Press ƒ to start program playback.

ª“PLAY PROGRAM” will be displayed.

ªThe track number and elapsed playing time of the current track will appear on the display.

•If you press REPEAT during program playback, the current track or all programmed tracks will be played repeatedly.

ª“TRACK” or "PROGRAM" will be displayed.

ªThe REPEAT and PROGRAM appear

on the display.

2Press ‚ to stop program playback.

Notes:

–If you press any of the CD DIRECT PLAY buttons, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROGRAM display also will disappear temporarily from the display. It will reappear when playback of the selected disc ends.

–REPEAT DISC mode will be cancelled when program playback begins.

Erasing the program (when

playback is stopped)

•Press ‚.

ª“PROGRAM CLEARED” will be displayed.

Note:

–The program will be erased when the system is disconnected from the power supply or when the CD carousel tray is opened.

pg 01-28/C50-C70/37-Eng

15

18/11/1999, 2:39 PM

3139 116 19441 (ENG)

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Mini Hi-Fi System Warranty Verification Dear Philips product owner Congratulations on your purchase, and welcome to the familySet complies with the FCC-Rules, Part 15 and with 21 CFR EL 4562-E004 99/3WHO is COVERED? Audio SystemFW-C70 FW-C50 General Information General Information Safety InformationAccessories Supplied Safety InformationRear Connections PreparationInserting batteries into the Remote Control FM Wire Antenna ConnectionConnecting other equipment to your System AC Power Supply3CD ControlsControls on the system and remote control Operating the System Sound Control To switch off DBBSelecting the Source Selecting the Equalizer DisplayPlaying a CD Discs for playbackCD Direct Play Loading the CD ChangerPlaying the program Selecting a desired trackProgramming Tracks Reviewing the programTuner Tuning to radio stationsManual programming Storing Preset StationsTuning to Preset Radio Stations Automatic programmingLoading a tape Rewind/Fast Forward TapeSelecting External Equipment Tape AUXRecording CD Synchro Start RecordingOne Touch Recording Clock Clock SettingPress CLOCK/TIMER to select clock mode 21RECORDINGTo start the Timer again for Timer Sleep TimerTimer Setting To switch off the TimerSpecifications SpecificationsRadio Reception Maintenance TroubleshootingMaintenance CD Player OperationGeneral Tape Deck OperationTable of Contents Guide FW-C70 FW-C50

C70, C50 specifications

Philips has long been a pioneer in innovative consumer electronics, and the C50 and C70 series exemplify its commitment to delivering quality and advanced features in audio technology. Both models cater to music enthusiasts who demand superior sound quality, sleek design, and exceptional usability, making them appealing choices for home audio systems.

The Philips C50 delivers robust sound performance, characterized by its powerful drivers and well-balanced audio output. With a total power output that ensures clear dialog and rich bass, it's ideal for movie nights as well as music listening sessions. The C50 is equipped with Bluetooth connectivity, allowing users to stream music from their smartphones or tablets seamlessly. The user interface is straightforward and intuitive, providing easy access to different audio sources and settings.

On the other hand, the C70 series takes audio performance a notch further. It features advanced sound processing technology that enhances clarity and presence across all frequencies. With adaptive sound tuning capabilities, the C70 automatically adjusts audio settings based on the environment, ensuring an optimal listening experience regardless of room acoustics.

Both models incorporate Philips’ signature Bass Reflex speaker system. This technology not only boosts low-frequency response for a richer sound but also minimizes distortion, resulting in an immersive audio experience. The elegant design of both the C50 and C70 features a modern aesthetic that complements any décor, with premium materials that enhance durability.

Battery life is another significant aspect where Philips shines. Both models have long-lasting battery capacities, allowing users to enjoy extended playback time without needing to recharge frequently. This is particularly convenient for those who prefer taking their audio experience on the go.

Additionally, the C70 features a built-in voice assistant compatibility, making it a smart audio device that can integrate with home automation systems. This allows users to control their audio setup with voice commands, adding an extra layer of convenience.

In conclusion, the Philips C50 and C70 series stand out in the crowded audio market thanks to their impressive sound quality, innovative features, and user-friendly design. Whether you are an audiophile or just seeking a reliable audio companion, these models provide exceptional performance that adapts to your needs, making them fantastic choices for any home audio setup.
Top Page Image Contents