Primera Technology 000424-510171-(05) Self-test should look like this, Software Installation

The self-test should look like this:

6.Connect the printer to your computer using the proper interface cable. For best results, use a IEEE 1284-Compliant cable and do not connect to an A/B switch box. Also, note that the printer will print fastest if your computer’s parallel port is set to ECP mode (most new computers are set to ECP). Your computer’s manual will have information on changing the parallel port mode if you need to switch it to ECP.

SOFTWARE INSTALLATION

Once you have set up your printer, you must then install all of the appropriate software required for printing. The included CD contains all of the necessary software. At a minimum, you must install the printer driver appropriate for your computer’s specific operation system (Windows® 95/98, Windows NT/2000, or Macintosh®). Below is a description of the CD contents as well as installation instructions for each software component.

CD Contents:

•CD Color Printer Driver III for Windows 95/98

•CD Color Printer Driver III for Windows NT/2000

•CD Color Printer Driver III for Macintosh

•32-Bit Print Spooler for Windows 95/98 (provides optimum print processing under Windows 95/98)

•2 Sample CD Designs (TIFF format)

iv