Primera Technology ADL-MAX user manual Power LED, Pause LED

TOC INDEX

Section 4: Interpreting the Autoloader's

LED Status Lights

The LED Status Lights are located on the front Control Panel. They can tell you a lot about what is happening at any given moment with the unit, including a number of error conditions. To accurately interpret what is meant when the lights are on, off, or flashing, please refer to the following chart:

Pause LED

Power LED

A. POWER LED
	Status	Condition
	Off	No Power. Plug in the Power Adapter. Also, check
		the USB cable on the back of the unit.
	On Solid	Power is ON. This is the unit’s normal
		"waiting" mode.
	Flashing	Power is ON, but an error condition exists:
		a. Didn't pick up a disc
		b. Dropped a disc
		c. Discs out
		d. Robotic arm stalled; it probably hit something
		while moving. Press any button on Control Panel
		to re-try.
B. PAUSE LED
	Status	Condition
	Off	Normal "waiting" mode
	On Solid	Autoloader is paused.
	Flashing	Autoloader is busy; i.e. motors are running,
		printer is printing, etc.

Maintenance and Troubleshooting 19