Samsung MXFS9000ZA user manual Recording Function, Cancelling the Timer, Basic Recording, Device

Advanced Functions

• The maximum length of time for tuner timer recording is

5 hours.

•If the timer switch on and off times are identical, the word ERROR is displayed.

•You can use the [, ] buttons on the product instead of the TUNING/ALBUM , or . button to make adjustments in Steps 3 through 8.

•If the switch-on or -off time is the same as the timer recording time, only the switch-on or -off time is effective, and the timer recording is not applied.

•When you use the auto timer, you may need an additional step to use a CD or USB device with it, depending on the disc (or device). Consequently, it is easier to use the tuner instead.

•If you select CD or USB mode when there is no disc or no USB in the product, it will automatically change to

TUNER.

Cancelling the Timer

After having set the timer, it will start automatically as shown by the TIMER ON message on the dis- play. If you no longer want to use the timer, you must cancel it.

To cancel the timer, Press the TIMER ON/OFF button once.

To restart the timer, Press the TIMER ON/OFF button once again.

•When you select the TIMER OFF mode, the TIMER RECORDING and TIME function are not available.

The Recording Function

Basic Recording

You can record from a CD, a USB device, a radio broadcast, or an external source to a USB storage

device.

1.Connect the external USB storage device to a USB

() jack on your product.

2.Play a disc or USB, turn on the radio and select a station, or connect the external source to your product as described below.

CD

•Press the CD button on the product to select the CD function.

•Insert a CD gently into the disc slot.

•Use the CD selection ( [ or ] ) buttons to select the desired song.

TUNER

•Select FM by pressing the TUNER/AUX button.

•Select the radio frequency you want to record.

USB 1

•Connect the USB device with the files you want to record to USB 1 jack.

•Press the USB button to select USB 1.

•Play a song from USB 1.

External Source

•Connect an External device/MP3 player to the product.

•Press the TUNER/AUX button to select <AUX IN 1 or AUX IN 2>.

•Play a song from the external device.

3.Press the USB REC button on the remote control to start recording.

CD

•Track recording message is displayed and CD recording starts.

•If you want to record all the tracks on the disc, press and hold the USB REC button. Then, Full CD recording message will be displayed.

RADIO

•Tuner recording message is displayed and recording starts.

CD-ROM/ USB

•“FILE COPY” is displayed and recording starts.

•You can also copy a folder including MP3/WMA files to a device on USB 2. if you press and hold the USB REC button while the system plays an MP3 or WMA file in a folder, your system will display "FOLDER COPY".

•When the recording is done, “STOP” will be displayed.

•If there is a file with the same name on the USB 2 device, "EXIST FILE" is displayed, and the function is canceled.

•If a microphone is connected to the product and you press the USB REC button, you activate the MP3 Recording function, not the Copy function.

•When you press the USB REC button for a second, file copy starts. When you press the USB REC button for a few seconds, folder copy starts.

External Source

•AUX recording message is displayed and recording starts.

CD/USB1(MP3) & MIC

•MP3 recording message is displayed and recording starts.

4.To stop recording, press the STOP (@) button. The recording is automatically saved as an MP3 file.

5.After the recording is finsihsed, a directory named “RECORDING”(CD-DA), “CD COPY”(CD-ROM/ USB(WMA/MP3)), “TUNER RECORDING”, “AUX RECORDING” or “MP3 RECORDING” is created in your device.

16 English