Video Guide

Introduction

MINIMUM SYSTEM REQUIREMENTS

Installation of your Philips Seismic Edge™ requires the following minimum hardware and operating system:

•One available PCI 2.1 compliant slot

•Intel Pentium® class or 100% compatible 166MHz or faster processor

•Intel® or 100% compatible motherboard chip set

•16MB system RAM

•CD ROM for driver installation

•Stereo, 4 channel surround powered speakers, 5.1 speakers or headphones

•Windows® 95, Windows® 98, Windows NT® 4.0 (SP3)*, Windows® 2000, Windows® Me

WHAT’S INCLUDED

You will find the following items in your Seismic Edge™ package:

1– Seismic Edge™ sound card in a anti-static pouch

1– Seismic Edge™ installation CD

1– Analog audio cable to connect CD/DVD drive to sound card

1– Seismic Edge™ user’s manual

1– Product registration card

Bundled applications may be included on the installation CD or on separate media depending on the Seismic Edge™ model.

Please retain the Yamaha Certificate of Authenticity.The included serial number will be needed during software installation.

*Not all product features supported using this operating system.

WHAT YOU NEED FOR INSTALLATION

Computers come in different shapes and sizes.The installation procedures in this manual apply generally and you should compare the illustrations here with your computer before you start your sound card installation.

•Sound card

•Installation CD

•CD Analog Audio Cable

•A Phillips screwdriver

Have your Windows® installation CD available as it may be needed to complete installation of common software components.

A 3-part video installation guide can be found on the Acoustic Edge Installation CD:

If CD/DVD autorun is enabled, a Philips Edge Series Autorun window will pop up when the CD is inserted into the CD drive.Then click on the “View PSC703/PSC705 Installation Videos" icon from the window. Another Philips Edge Series AutoRun window will pop up; click on either Part 1: Introduction.mpg, Part 2: Hardware.mpg, Part 3: Software.mpg, depending on which part you want to view.

If CD/DVD autorun is disabled, double-click on “autorun.exe”, located in the root directory of the Philips install CD, or run it from the Windows-Start/Run menu. Another way to manually start is by double clicking on Desktop/My Computer, then click on the Philips Edge icon. Once the Philips Edge Series AutoRun window pops up you may make the same choices as stated above (Part 1: Introduction.mpg, Part 2: Hardware.mpg, Part 3: Software.mpg).