Philips BDH5031V.00 Watching TWO Pictures Simultaneously, Screen Adjustment of the Sub-picture

User Manual BDH5031V

PIP POSITION C

6.5 WATCHING TWO PICTURES SIMULTANEOUSLY

•PIP (Picture-in-Picture) and P-by-P (Picture-by-Picture) modes allow users to watch two pictures simultaneously.

Screen Adjustment of the Sub-picture

•Alpha Blend of the sub-picture can be adjusted on Screen Menu of OSD.

•Alpha Blend is only available in PIP mode.

PIP SOURCE SWAP

	PIP		P by P
Main	Main		Main	Sub
		Sub

<Using ‘Position’ button>

Alpha Blend - The adjustment of alpha blend allows the subpicture to be translucent. The translucent rate is controlled with “/” buttons.

1. Engaging PIP mode.

•Press the ‘PIP’ button once on the remote control to engage the Pic- ture-in-Picture mode.

•By pressing the button repeatedly, it will show the following cycle.

•If switched to P-by-P (Picture-by-Picture) mode, the screen will be split in half. The screen on the left side is the main picture, and the sub-pic- ture will be on the right of the screen.

2. Position of the Sub-picture.

Main

Sub

Sub

Main

Main

Sub

Sub

Main

•When PIP mode is engaged, the sub-picture can be displayed in one of the four corners by using ‚POSITION’ button.

•Whenever pressing the button, the sub-picture will be cycling in the following order.

•If you would like to move the sub-picture to specific position you de- sire, use navigation keys.

<Using “/” and “/” button>

Sub

3. Swap the pictures.

•In order to swap between the main picture and sub-picture, press the ‘SWAP’ button.

RETURN TO THE CONTENTS