Philips 235BL2, 235B2 user manual PowerSensor, Settings Default settings, Custom settings

Page 28

3.7 PowerSensor

PowerSensor is a unique environmentally friendly technology from Philips which enables user to save up to 80% of power consumption. In line with Philip’s Sense and Simplicity drive, this user friendly technology works for you right out of the box without any hardware or software installation, and without any user intervention in the default mode.

How does it work?

PowerSensor works on principle of transmission and reception of harmless “infrared” signals in order to detect user- presence.

When the user is in front of the monitor the monitor operates normally, at the predetermined settings that the user has set- i.e. Brightness, contrast, color, etc

Assuming that the monitor was set to 100% of brightness for example, when the user leaves his seat and is no longer in front of the monitor, the monitor automatically reduces the power consumption up to 80%.

User present in front

User not present

42 Watt

8.5 Watt

 

45W

Power consumption as illustrated above is for reference purpose only

Settings

Default settings

At its default setting, (Setting 3), PowerSensor is designed to detect the presence of the user located between 30 and 100 cm (12 and 40 inches) from the display and within five degrees left or right of the monitor.

Custom settings

If you prefer to be in a position outside the perimeters listed above, choose a higher strength signal for optimal detection efficiency:The higher the setting, the stronger the detection signal. For maximum PowerSensor efficiency and proper detection, please position yourself directly in front of your monitor.

If you choose to position yourself more than 100 cm or 40 inches from the monitor use the maximum detection signal for distances up to 120cm or 47 inches. (setting 4)

Since some dark colored clothing tends to absorb infrared signals even when the user is within 100 cm or 40 inches of the display, step up signal strength when wearing black or other dark garb.

You can return to the default mode at any time (setting 3)

How to adjust settings

If PowerSensor is not operating correctly inside or outside the default range, here’s how to fine-tune detection:

Press the PowerSensor hot key

You will find the default position ‘3’ on the adjustment bar.

Adjust the PowerSensor detection adjustment to Setting 4 and press OK.

Test the new setup to see if PowerSensor properly detects you in your current position.

Hot key

Sensor distance

 

4

3

2

1

0

 

 

 

 

1

0

 

 

 

2

 

 

 

3

 

 

 

4

 

 

 

 

 

 

 

 

Note

A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength.

26

Image 28
Contents Customer care and warranty Troubleshooting & FAQs Table of Contents Safety precautions and maintenance Please use approved power cord providedOTemperature 0-40C 32-95F OHumidity 20-80% RH OperationNotational Descriptions Disposal of product and packing material Waste Electrical and Electronic EquipmentInstallation Package contentsConnecting to your PC Main menu Sub menu Resolution notification 65˚Page Remove the Base Condition How to enable SmartImage? Why do I need it?Except using key to scroll down, you can also How does it work?SmartContrast What is it? Off No optimization by SmartImageWhat is it? Philips SmartControl Premium First launch -WizardStart with Standard pane Adjust menu Page ECO Page OptionAuto Pivot Facoty Preset can also be called from the drop down menu Task Tray Menu Enabled Other alternative path Vista Drag and Drop WindowsWin No other alternative path available Title Bar Options Display Tune from the start menu or short cut on the desktopLeft Click Menu SmartDesktop Partition Definitions Name Description ImageHorizontal Split Top Left side VerticalRight side Vertical Right side Vertical Even SplitSettings Default settings PowerSensorCustom settings Philips Flat Panel Monitors Pixel Defect Policy Pixels and Sub pixelsTypes of Pixel Defects Bright Dot DefectsModel YES TFT-LCDUSB Mtbf Environmental Rohs YES EpeatResolution & Preset Modes Maximum Resolution Automatic PowerSavingPower Management Definition For 235B2/235BL2Electrical Safety Very low energy consumption both in on- and standby modeLead-free Product Epeat Electronic Product2006/95/EC Low Voltage Directive 2004/108/EC EMC Directive Benefits of EpeatProduct also comply with the following standards Federal Communications Commission FCC Notice U.S. Only Reorient or relocate the receiving antennaCommission Federale de la Communication FCC DeclarationPolish Center for Testing and Certification Notice Paikka/IlmankiertoVaroitus Plassering/VentilasjonErgonomie Hinweis nur Deutschland Achtung Beim AufstellenEastern Europe Latin AmericaNorth America PacificPhilips F1rst Choice Warranty may not apply if What is excluded?Other cards installed Page Dear Customer Philips guarantee may not apply ifJust a click away Just a phone call away Estonia Fujitsu Services OU BelarusBulgaria Czech RepublicRomania Turkey Serbia & MontenegroUkraine SlovakiaHong Kong Additional service pointsKediri, Gersik South Africa Page WHO is COVERED? What is COVERED? What is EXCLUDED?Your warranty does not cover Where can I GET More INFORMATION?To GET Warranty Service in Canada Your International Guarantee Dear Customer Troubleshooting No Picture Power LED not litNo Picture Power LED is white blinking Screen saysPower on light is too strong and is disturbing Horizontal flicker appearsImage appears blurred, indistinct or too dark No soundSmartControl Premium FAQs Run Windows Update and updated monitor and/or video driverPage Icm? Q4 How do I adjust the resolution? Q2 What does the recommended refresh rate for monitor?Q7 How should I clean the monitor surface? Press OK to show the OSD On Screen Display menuQ9 Can the Philips monitor be mounted on the wall? Q10 Can I connect my monitor to any PC, workstation or Mac?

235B2, 235BL2 specifications

The Philips 235BL2 and 235B2 monitors are designed to deliver exceptional visual performance while incorporating a range of features that cater to both professional and personal use. These monitors exemplify the fusion of advanced technology and user-friendly design, making them ideal for a variety of applications.

One of the standout features of the Philips 235BL2 and 235B2 is their high-definition display. With a 23-inch screen size and a resolution of 1920 x 1080 pixels, these monitors provide stunning clarity and vibrant colors. The full HD display ensures that every detail is captured, making it perfect for watching movies, editing photos, or working on intricate projects. Additionally, the use of an IPS panel allows for wider viewing angles, ensuring consistent color reproduction from multiple positions, which is particularly beneficial in collaborative work environments.

Both models also feature Philips' SmartContrast technology, which enhances the visual experience by providing dynamic contrast ratios. This technology automatically adjusts the contrast based on the displayed content, resulting in deeper blacks and brighter whites. Whether you are watching a video or working on a detailed design, this feature enhances the overall visual quality.

The design of the Philips 235BL2 and 235B2 also prioritizes user comfort. They come equipped with ergonomic features such as height adjustment, tilt, and swivel capabilities. This adaptability allows users to customize their workspace for maximum comfort, reducing strain during prolonged use. Moreover, both monitors are equipped with LowBlue Mode and Flicker-Free technology to help minimize eye fatigue. LowBlue Mode reduces harmful blue light emissions, while Flicker-Free technology eliminates screen flicker, making these monitors ideal for extended use.

Furthermore, connectivity options are plentiful with these models. They feature multiple ports, including HDMI, VGA, and DVI, allowing for easy connection to various devices, whether they are laptops, desktops, or gaming consoles. This versatility ensures seamless integration into any setup, facilitating a smooth user experience.

In summary, the Philips 235BL2 and 235B2 monitors combine exceptional visual performance with ergonomic comfort and versatile connectivity options. With cutting-edge technologies like SmartContrast and an IPS display, these monitors enhance any workspace or entertainment setup, making them a valuable addition for both professionals and casual users alike.