Philips Pixel Defect Policy
| Two adjacent lit subpixels: | Three adjacent lit subpixels (one |
One lit red, green or blue | - Red + Blue = Purple | |
subpixel | - Red + Green = Yellow | white pixel) |
| - Green + Blue = Cyan (Light Blue) |
|
Black Dot Defects Black dot defects appear as pixels or subpixels that are always dark or "off". These are the types of black dot defects:
One dark subpixel | Two or three adjacent dark subpixels |
Proximity of Pixel Defects
Because pixel and subpixels defects of the same type that are nearby one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects.
Pixel Defect Tolerances
In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or subpixel defects exceeding the tolerances listed in the following tables.
BRIGHT DOT DEFECTS |
| ACCEPTABLE LEVEL |
MODEL |
| 200P3 |
|
|
|
1 lit subpixel |
| 6 or fewer |
|
|
|
2 adjacent lit subpixels |
| 2 or fewer |
|
| |
3 adjacent lit subpixels (one white pixel) |
| 0 |
|
|
|
Distance between two bright dot defects* |
| 25 mm or more |
|
|
|
Bright dot defects within 20 mm circle |
| N/A |
|
|
|
file:///D/K1/english/200p3mg/product/pixel.htm (2 of 3) [1/3/2003 3:35:08 PM]