Samsung VP-D230(I), VP-D250(I), VP-D200(I), VP-D270(I) manual Zero Memory VP-D230i/D250i/D270i only

ENGLISH

Playback

ZERO MEMORY (VP-D230(i)/D250(i)/D270(i) only)

✤The ZERO MEMORY function works in both CAM and PLAYER modes.

✤You can mark a point on a tape that you want to return to following playback.

ZERO MEMORY [VP-D230(i)/D250(i)/D270(i)]

✤CAMPLAYER ZERO MEMORY

✤

1.

1.Press the ZERO MEMORY button on the remote control before the recording or during the playback at the point you wish to return.

■The time code is changed to a tape counter that is set to zero memory with the M 0:00:00(Zero memory indicator)

■If you want to cancel the zero memory function, press the ZERO MEMORY button again.

2.Finding the zero position.

■When you have finished playback, fast forward or rewind the tape.

-The tape stops automatically when it reaches the zero position.

■When you have finished recording, press the power switch on the

PLAYER and press the (REW) button.

-The tape stops automatically when it reaches the zero position.

3.The tape counter with the M (Zero memory indicator) disappears from the display and the tape counter is changed to the time code.

Notes

ZERO MEMORY

■

M 0:00:00

■ZERO MEMORY

2.

■

-

■PLAYER

REW

-

3. M

■

■In the following situations, ZERO MEMORY mode may be canceled automatically:

- At the end of the section marked with the ZERO MEMORY

function. ■

-When the tape is ejected.

-When you remove the battery pack or power supply.

■The zero memory may not function correctly where there is a break between recordings on the tape.

-

-

-

74