Philips 180P user manual Video

Page 8

180P Product Information

 

Horizontal Frequency

30KHz-82KHz

VIDEO

Video dot rate

Input impedance

-Video

-Sync

Input signal levels

Sync input signal

Sync polarities

Video interface

AUDIO

135MHz

75ohm

2KOhm 0.7 Vpp

Separate sync Composite sync Sync on green

Positive and negative

Dual input : Both Analog (D-Sub) and DVI-D (Digital) are available It can be switching via OSD selection.

• Input signal levels

0.7Vpp

• Headphone out signal level

32 ohm 20 + 20 mW

• Input signal connector

3.5mm mini jack

• Loudspeakers

1 + 1 W stereo front firing (PMPO:24W)

MICROPHONE

• Sensitivity

-51dB re 1V/ubar

• Output impedance

2.2KOhm max

• Directivity

-5dB at 180°

• Frequency range

300Hz~3KHz

OPTICAL CHARACTERISTICS

• Contrast ratio

250 (typ.)

• Brightness

200 nits (typ.)

• White Chromacity

x: 0.281 y: 0.311 (at 9300° K) x: 0.312 y: 0.338 (at 6500° K)

 

Upper >80 ° (min.)

• Viewing Angle (C/R >5)

Lower >80° (min.)

Left >80 ° (min.)

 

 

Right >80 ° (min.)

file:///D/Philips LCD/english/180P/PRODUCT/PRODUCT.HTM (2 of 10) [1/20/2001 3:19:28 PM]

Image 8
Contents Page Installation Locations Safety and Troubleshooting InformationSafety precautions and maintenance Correct handling of the monitor Equipment Notational Descriptions About This GuideOther Documents You May Need Return to TOP Product Information Product FeaturesTechnical Specifications Video 32USER Definable Modes Automatic Power Saving Physical SpecificationsSignal Pin Assignment AssignmentViews Front View Product DescriptionNo Video Input Entering Sleep Mode Mute on This is the Best Picture Shape Installing your LCD Monitor Front ViewOptimizing Performance On-Screen Display Description of the On Screen DisplayOSD Tree Page Page Return to TOP Customer Care & Warranty North America Canada USAGlossary BNC connectionSUB USB LCD Liquid Crystal Display Vertical refresh rate Return to TOP Download and Print Download instructionsInstalling FPadjust Program Printing instructionsFAQs Frequently Asked Questions General FAQsFAQs Frequently Asked Questions Page Screen Adjustments Compatibility with other Peripherals LCD Panel Technology FAQs Frequently Asked Questions Ergonomics, Ecology, and Safety Standards Return to TOP Troubleshooting Common ProblemsImaging Problems Return to TOP Regulatory Information Philips Federal Communications Commission FCC Notice U.S. Only EN 55022 Compliance Czech Republic Only Varning Earthed How to connect a plug Information for Users outside the U.S Other Related InformationInformation for Users in the U. S Philips Pixel Defect Policy Philips Flat Panel Monitors Pixel Defect PolicyProximity of Pixel Defects Return to TOP Connecting to Your PC Accessory PackConnecting to Your PC VGARemove the plastic ring from the hinge Connecting to Your PC Return to TOP Getting Started Getting StartedInstalling Your USB Hub Description of the USB HubApplication Just a few peripherals you can connect to your USB HubInstalling Your USB Hub Installation of USB HubReturn to TOP Installing the Protective Cover Installing the Protective Cover Cleaning Instructions Cleaning Instructions Installing Your Wall Mount Kit Installing the Wall Mount KitInstalling Your Wall Mount Kit Installing Your Wall Mount Kit Return to TOP OSD Controls BrightnessVolume Language Adjust Position SmartOSD Controls Adjust Size Brightness & Contrast OSD Controls Image Optimizaton OSD Controls Adjust Color OSD Controls Smart Help Product Information Reset to Factory Settings Monitor, Reset to Factory Settings is your last selection Input Selection not available on all monitors Exit Main Controls Your International Philips F1rst Choice Warranty Thank you for purchasing this Philips monitorYour International Guarantee Limited Warranty Computer Monitor WHO is COVERED? What is COVERED?Before Requesting Service Philips Customer Care Center, P. O. Box 2976, Longview, TX