Disc Playback
1 Press OPEN/CLOSE button to open the disc tray.
2 Load a disc.
• Place a disc gently into the tray with the disc’s label facing up.
3 Press OPEN/CLOSE button to close the disc tray.
Note • For mixed discs, the play order is as below:MP3/WMA DIVX JPEG.
• Depending on the content of the disc, the initial screen may appear different.
•Depending on the recording mode, some
•For CD discs, you can press the numeric buttons to select the track, when you press the numeric buttons after 3 seconds, the playback starts automatically.
•Table of contents of a
•DTS Audio disc is not supported.
•DVD Audio disc is not supported.
To stop playback, press STOP button during playback.
• If pressed once, the stop position will be stored in memory. If PLAY ( ) button is pressed, playback resumes from the stop position. (This function works only with DVDs.)
• If pressed twice, “STOP” is displayed, and if PLAY ( ) button is pressed, playback starts from the beginning.
To temporarily pause playback, press PAUSE button during playback.
• To resume playback, press PLAY( ) button again.
ENG
OPERATION
24