FAQs (Frequently Asked Questions)
Q:What does "refresh rate" mean to me in an LCD monitor?
A:For LCD monitors, the refresh rate is much less relevant. LCD monitors display a stable,
Q:What are the .inf and .icm files on the setup disk &
.icm)?
A:These are the driver files for your monitor. Follow the instructions in your user manual to install
the drivers. You computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you first install your monitor. Follow the instructions to insert the driver disk (either floppy or
Q:How do I adjust resolution?
A:Your video card/graphic driver and monitor together determine the available resolutions. You
can select desired resolution under Window 95/98 with the "Display properties/Settings" control panel
Q:What if I get lost when making monitor adjustments?
A:Simply press the OSD button, then select "Reset" to recall all original factory settings.
Q:What is the Auto function?
A:The AUTO adjustment key restores optimal screen position, phase and clock settings with the press of a single button – without navigation through OSD menus and control keys.
Q:My Monitor has no power (Power LED does not light) ? What should I do?
A:Make sure the AC power cord is connected to the Monitor.
Q:Will the LCD monitor accept an Interlaced signal?
A:No If an Interlace signal is used, the screen displays both odd and even horizontal scanning lines at the same time, distorting the picture.
file:///D/Grace/150P2/english/150p2m/safety/saf_faq.htm (2 of 8) [9/5/2001 11:09:19 AM]