DEMO/DIMMER function
GB
All functions available on the system can be viewed on the display and the display's brightness can be switched between "on" and "off".
1 Press the DEMO/DIMMER button.
Result: All functions available on the system appear on the front panel display.
Each of these are explained in detail in this guide. Please refer to the relevant section.
2 Press the DEMO/DIMMER button again.
Result: The Dimmer function is selected and the display darkens.
Press the DEMO/DIMMER button once again to brighten the front panel display.
3 A display brightness control can only be performed while the system power is on.
/ |
ECO Mode Function
You can save the power consumption while the unit is turned off(on standby).
To activate the ECO mode,Press ECO/STANDBY/ON while the unit is turned off (on standby),The display illumination(including the display demonstration) disappears.
While ECO mode is activated, the display demonstration is canceled temporarily.
10 |
Setting the Clock
Your system is equipped with a clock which allows you to turn your system on and off automatically.
You should set the clock:
When you first purchase the
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
1 | Switch the system on by pressing ECO/STANDBY/ON. | |
2 | Press TIMER/CLOCK twice. |
|
| Result: CLOCK is displayed. |
|
3 | Press ENTER/DISPLAY. |
|
| Result: The hour flashes. |
|
4 |
|
|
To... | Turn the MULTI JOG knob to the... | |
| Increase the hours | Right |
| Decrease the hours | Left |
5 | When the correct hour is displayed, press ENTER/DISPLAY. | |
| Result: The minutes flash. |
|
6 |
|
|
To... | Turn the MULTI JOG knob to the... | |
| Increase the minutes | Right |
| Decrease the minutes | Left |
7 | When the correct time is displayed, press ENTER/DISPLAY. | |
| Result: The clock starts and is displayed, even when the system is in |
standby mode.
You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.
You can also use / buttons to instead MULTI JOG knob in step 4, 6.
1 |
2 |
/ |
4,6 |
3,5,7 |