Troubleshooting
Horizontal flicker appears
The screen is too bright or too dark
An
An afterimage remains after the power has been turned off.
Green, red, blue, dark, and white dots remains
●Push the Auto button.
●Eliminate the horizontal bars using the Phase Adjustment of VIDEO NOISE in OSD Main Controls.
●Adjust the contrast and brightness in OSD Main Controls. (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer.
●If an image remains in the screen for an extended period of time, it may be imprinted in the screen and leave an afterimage This usually disappears after a few hours
●This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The afterimage will disappear after a set amount of time
●The remaining dots are normal characteristic of the liquid crystal used in today’s technology.
For further assistance, refer to the Consumer Information Centers list to contact your local Philips distributor.
RETURN TO TOP OF THE PAGE
file:///D/Grace/03115/english/150b2b/safety/saf_troub.htm (2 of 2) [11/30/2001 1:39:27 PM]