![](/images/new-backgrounds/1103388/103388151x1.webp)
109P The OSD Controls
6)To adjust the horizontal moire, press the or
button.
7)When the moire is adjusted, press the button to return to the EXTRA CONTROLS window. BACK TO MAIN CONTROLS will be highlighted.
After returning to MAIN CONTROLS . . .
Smart | . . . to exit completely, press the | button. |
Help |
|
|
ADJUST CONVERGENCE (Not available in all models)
EXTRA CONTROLS is a set of features, including ADJUST CONVERGENCE. Convergence is a process by which a color is created by blending other colors. For example, white is created by blending red, blue, and green. If these colors do not completely blend together (converge) then you may see unwanted red, green, or blue lines or dots. To adjust the convergence, follow the steps below. Note: Use only if necessary. Remember: you must degauss the monitor BEFORE adjusting the convergence.
1)Press the button on the monitor. The MAIN CONTROLS window appears.
2)Press the button until EXTRA CONTROLS is highlighted.
file:///G/manual/english/109P/osd/osd_cont.htm (24 of 32) [10/16/1999 6:32:49 AM]