Philips 107T41 user manual How can I increase the color display of my monitor?

Page 32

Frequently Asked Questions

This phenomenon can occur with Philips 107P, 109P and 201P monitors and is normal. Your monitor is using an Aperture Grille, which consists of fine vertical wires to align the electron beams with the phosphors on the screen. To prevent these vertical wires from vibrating and to keep them properly aligned with the picture tube, two horizontal damper wires are required. These are located on one-third and on two-third from the top of the screen. The result is that you will see two very thin horizontal lines over your screen since the two wires are casting a slight shadow on the screen surface. You will find these wires (line) in any monitor from Philips and other brands using the Aperture Grille technology.

46. How can I increase the color display of my monitor?

The amount of video memory your video card holds determines the amount of colors that can be displayed on your computer screen. To get the most out of your video card, you will need to either install the latest drivers onto your computer or upgrade the video cards memory. Please check with your computer or video card manufacturer for further details.

47.Why is there no picture on my monitor?

●Check the wall socket for power. Verify that there is power by connecting another product.

●Ensure the power cable is correctly attached to both the wall socket and the monitor.

●Check that the power button is switched on.

●Unplug the monitor for approx. 1 minute and plug it in again. Switch the monitor back on.

48.Why is there no picture on my monitor even though the power LED is yellow/amber?

●Reboot your computer while holding the Ctrl key on your computer. If you see any picture during the boot procedure, please verify the settings of your video card (for Windows go to Control Panel and select Display).

●Check that the video cable is not damaged, bent or that any of the pins in the connector are damaged (please be aware that all VGA connectors have one missing pin). If damaged, replace with a new cable.

●Check that the cable is attached correctly to the computer.

●Press any key on the keyboard to wake-up the computer from power saving mode.

49.Why is there no picture on my monitor even though the power LED is green?

●Verify the Contrast and Brightness setting of the monitor. First press and hold the 5 button to increase Contrast and then press and hold the 4 button to increase Brightness. These buttons are located on the front of your monitor.

●Press both the 5 button and the OK button at the same time to switch input AB.

●Try and repeat step 48 above.

file:///D/Rita/LF3/lf3manual/english/FAQ.HTM (11 of 12) [2002/7/7 ?? 11:12:29]

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Page Safety and Troubleshooting Information Safety precautions and maintenanceNotational Descriptions About This GuideOther Documents You May Need Return to TOP LightFrame for Windows Product FeaturesProduct Information Language Selection Compatibility How many windows can I enhance at the same time? How can I tell if my monitor comes with LightFrame 3? Technical Specifications CRTAutomatic Power Saving Power Management DefinitionPhysical Specifications Pin AssignmentViews Front View Rear ViewInstalling your Monitor Front ViewRear View Return to TOP On-Screen Display Description of the On Screen DisplayOSD Tree Page Return to TOP Customer Care & Warranty Middle East Dubai EgyptWhat is USB? What is a USB hub?What is Philips Monitors USB hub solution? Where can I buy a USB hub for my Philips monitor?What is TCO? What is MPR?Safety What models are Mac compatible?How do I enable the energy saving function? What is refresh rate?Why does the picture on the screen appear to flicker? EcologyHow do I adjust my monitors resolution? What if I get lost when making monitor adjustments?What is LightFrame? How does LightFrame work?Will LightFrame shorten the life of a monitor? Why is LightFrame important to me?Will anyone else have this? What is XtraSpace Design XSD? What is Philips monitors solution for audio?What are Philips Multimedia Bases specifications? How did Philips achieve XtraSpace Design?Why is a Multimedia Base better than separate speakers? How does Philips Auto Calibrate feature benefit me?What does Auto Calibrate do? How does Auto Calibrate work?When should calibration be performed? My screen shows no Sync Input , how can I get rid of this?Why does my monitor display Out of Range? What is CustoMax?How do I adjust the picture on the screen? Picture appears too dim. How can I correct this?Why is there no picture on my monitor? How can I increase the color display of my monitor?Frequently Asked Questions BNC connection GlossaryBalanced pincushion Color temperature Convergence errorCE Mark ContrastDDC Display Data Channel Convergence-error correctionCustoMax DDC 1/2B DDC 2BiDegaussing Digital controlDot rate Electromagnetic radiation standardsFlicker HertzHorizontal dot pitch Horizontal scanning frequencyINF File Interlaced/non-interlacedLinearity Line frequencyLow-emission monitor Low-frequency electric and magnetic fieldsMoiré effect MultiSync monitorOSD On Screen Display OverscanParallelogram Distortion PhosphorPin-cushion Distortion PixelResolution RasterRefresh rate Rotation functionAnti-Static coatings Self-test function ShapeSOG Synchronization On Green Tilt functionUSB or Universal Serial Bus TTL signalTrapezoid distortion UPS Universal Power Supply DeviceVertical dot pitch Vertical scanning frequencyVertical sync pulses Video dot rateVIS Viewable Image Size Download and Print Download instructionsPage Page Troubleshooting Common ProblemsReturn to TOP Why do we have environmentally labeled computers? Regulatory InformationTCO 99 Information What does labeling involve?Environmental Requirements Flame retardantsCE Declaration of Conformity MercuryFederal Communications Commission FCC Notice U.S. Only Energy Star DeclarationPhilips Commission Federale de la Communication FCC Declaration EN 55022 Compliance Czech Republic Only Vcci Notice Japan OnlyPolish Center for Testing and Certification Notice MIC Notice South Korea OnlyNorth Europe Information VarningErgonomie Hinweis nur Deutschland VaroitusBsmi Notice Taiwan Only Earthed End-of-Life DisposalInformation for UK only How to connect a plug Other Related Information Information for Users in the U. SFor units set at 115 For units set at 2306G3B11 Multimedia Base option Description of the ControlsInstalling your Multimedia Pedestal To InstallTo UN-INSTALL Power adapter InstallationReturn to TOP Follow Steps 1 and 2 above Installing your USB HubPCUH411 USB Hub Option Return to TOP Contrast OSD ControlsBrightness Language Smart Input Signal Selection Not available in all models Zoom Adjust Horizontal OSD Controls Adjust Vertical OSD Controls Adjust Shape Adjust Side CurveOSD Controls OSD Controls Adjust Side Angles OSD Controls Rotate Image Not available in all models OSD Controls Adjust Color OSD Controls Reset to Factory Settings OSD Controls Extra Controls DegaussAdjust Moire Not available in all models OSD Controls Turn on LightFrame Not available in all models OSD Controls Close Main Controls Return to TOP Your International Philips F1rst Choice Warranty Thank you for purchasing this Philips monitorYour International Guarantee Limited Warranty Where is Service AVAILABLE?Your International Philips F1rst Choice Warranty United States Guarantee Limited Warranty Computer MonitorBefore Requesting Service Philips Customer Care Center, P. O. Box 2976, Longview, TX

107T41 specifications

The Philips 107T41 is a notable addition to the realm of cathode ray tube (CRT) monitors, designed to enhance user experience through its combination of performance, reliability, and innovative technology. Launched during a time when CRT technology held significant market relevance, the 107T41 was well-received for its robust features and capabilities.

One of the defining characteristics of the Philips 107T41 is its screen size. With a 17-inch display, this monitor strikes a balance between desk space usability and adequate display area for diverse applications. The screen is designed to offer a resolution of 1280x1024 pixels, enabling clear and sharp images that cater well to both office productivity tasks and multimedia consumption.

The monitor employs advanced cathode ray tube technology allowing for vibrant color reproduction and excellent contrast ratio. The color depth is capable of handling 16.7 million colors which enhances the visual experience whether for gaming, graphic design, or general computing. The Philips 107T41 features a maximum refresh rate of 85 Hz, reducing flicker and providing smoother motion, which is particularly beneficial for users who spend extended hours in front of the screen.

In terms of ergonomics, the Philips 107T41 offers adjustability features that help users position the screen for optimum viewing angles, thus minimizing neck and eye strain. The monitor has also been designed with several connectivity options. The primary VGA input ensures compatibility with a wide range of devices, making it a versatile choice for various setups.

Another significant feature of the Philips 107T41 is its energy efficiency. With an emphasis on minimizing power consumption without compromising on performance, the monitor integrates technologies aimed at reducing energy usage. This not only translates into lower electricity bills but also aligns with eco-friendly practices.

In summary, the Philips 107T41 stands out in the CRT monitor landscape with its 17-inch size, high resolution, excellent color reproduction, and ergonomic design. Though modern technology has largely transitioned to flat panel displays, the 107T41 remains a testament to the durability and performance of CRT technology, appealing to users who seek reliable and quality visual output. Whether utilized for work or entertainment, the Philips 107T41 was designed to meet various demands while delivering exceptional value.
Top Page Image Contents