Samsung MXF830BZA user manual Setting the Clock, Timer Function, Cancelling the Timer, Usb

Setting the Clock

During each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1.Switch the system on by pressing the POWER

( ) button.

2.Press the TIMER SET button and then press the

ENTER ( ) button. "CLOCK" is displayed.

3. Press the ENTER ( ) button. The hour flashes.

•Increase the hours: ,

•Decrease the hours: .

4.When the correct hour is displayed, press the

ENTER ( ) button. The minutes flash.

•Increase the minutes: ,

•Decrease the minutes: .

5.When the correct minute is displayed, press the

ENTER ( ) button. " TIME" appears in the display.

•The current time is now set.

•You can display the time, even when you are using another function, by pressing the TIMER SET button once.

•You can also use the ] or [ on the front panel instead of the TUNING/ALBUM , or . button in Steps 3 and 4.

Timer Function

The timer enables you to switch the system on or off at specific times automatically.

•Before setting the timer, check that the current time is correct.

•During each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

•If you no longer want the system to be switched on or off automatically, you must cancel the timer by pressing the TIMER ON/OFF button.

Example: You want to wake up to music every morning.

1.Switch the system on by pressing the POWER ( ) button.

2.Press the TIMER SET button until TIME is displayed.

3.Press the ENTER ( ) button.

Result: ON is displayed for a few seconds. You can set the timer switch-on time.

4.Set the timer switch-on time.

a Press the TUNING/ALBUM , or . button to set the hours.

b Press the ENTER ( ) button.

Result: The minutes flash.

cPress the TUNING/ALBUM , or . button to set the minutes.

dPress the ENTER ( ) button.

Result: OFF is displayed for a few seconds. You can now set the timer switch-off time.

5.Set the timer switch-off time.

aPress the TUNING/ALBUM , or . button to set the hours.

bPress the ENTER ( ) button. Result: The minutes flash.

cPress the TUNING/ALBUM , or . button to set the minutes.

dPress the ENTER ( ) button.

Result: VOL XX is displayed, where XX corre- sponds to the volume already set.

6.Press the TUNING/ALBUM , or . button to adjust

the volume level and press the ENTER ( )button. Result: The source to be selected is displayed.

7.Press the TUNING/ALBUM , or . button to select the desired source to be played when the system switches on.

If you select...	You must also...
FM (radio)	a Press the ENTER (	) button.

bSelect a preset station by pressing the TUNING/ALBUM , or . button.

CD/MP3 (compact disc)	Load one compact disc.
USB	Connect the USB device.

8.Press the ENTER ( ) button.

Result: CHKREC (Do you want to record?) is displayed.

9.Press the ENTER ( ) button.

Result: REC N is displayed, you can press the TUN- ING/ALBUM , or . button to select the REC Y or REC N, and then press ENTER ( ) button.

1)If you select the REC N, it will cancel tuner timer recording even if you have already set the tuner timer recording.

2)If you select the REC Y, you can set the tuner timer recording.

a. Press the ENTER ( ) button.

Result: ON is displayed for a few seconds. You can set the tuner timer recording switch-on time.

b.Press the ENTER ( ) button.

Result: OFF is displayed for a few seconds. You can set the tuner timer recording switch-off time.

• The maximum tuner timer recording time is 5 hours.

•If the timer switch on and off times are identical, the word ERROR is displayed.

•If there is no disc or usb, when you select the “CD, USB, it will automatically change to “TUNER”.

•You may use the ], [ buttons on the main unit instead of the TUNING/ALBUM , or . button to adjust in Steps 4 through 9.

•If the switch-on or -off time is the same as the timer recording time, only the switch-on or -off time is effective, and the timer recording time is not applied.

•If the auto timer is turned on, the MP3/CD or USB function may require an additional step to be activated depending on the disc (or device). It is better for you to select the tuner function instead.

Cancelling the Timer

After you have set the timer, the unit will start auto- matically at the time shown by the TIMER indication on the display. If you no longer want to use the timer, you must cancel it.

To	Press the TIMER ON/OFF button....
Cancel the timer	Once. Result:	is no longer displayed.
Restart the timer	Twice. Result:	is displayed again.

• When you select the TIMER OFF mode, the TIMER RECORDING and TIME function are not available.

English 13