FAQs (Frequently Asked Questions)
Q:When I install my monitor, how do I get the best performance for the monitor?
A:
1.For best performance, make sure your display settings are set at 1024x768@60Hz for 14"/15", 1280x1024@60Hz for 17"/18". Note: You can check the current display settings by pressing the OSD OK button once.
The current display mode is shown in product information in OSD main controls.
2.To install the Flat Panel Adjust (FPadjust) program located on the monitor setup
3.Run FPadjust by double clicking the shortcut. Follow the instructions step by step to optimize image performance with your system's video controller.
Q:How do LCDs compare to CRTs in terms of radiation?
A:Because LCDs do not use an electron gun, they do not generate the same amount of radiation at the screen surface.
RETURN TO TOP OF THE PAGE
Compatibility with other Peripherals
Q:Can I connect my LCD monitor to any PC, workstation or Mac?
A:Yes, all Philips LCD monitors are fully compatible with standard PC, Mac and workstation. You
may need a cable adapter to connect the monitor to your Mac system. Please contact your dealer/reseller for more information.
Q:Are Philips LCD monitors
A:Yes, the monitors are
Q:What is USB (Universal Serial Bus)?
A:Think of USB as a smart plug for PC peripherals. USB automatically determines resources (like
driver software and bus bandwidth) required by peripherals. USB makes necessary resources available without user intervention. There are three main benefits of USB. USB eliminates "case angst," the fear of removing the computer case to install circuit board cards
file:///D/L/english/170s4fgbs/safety/saf_faq.htm (4 of 8) [4/28/2003 1:34:16 PM]