SmartManage
Q2. I change the monitor on a PC to a different one and the SmartControl becomes
A. Restart your PC and see if SmartControl can work. Otherwise, you will need to remove and re- install SmartControl to ensure proper driver is installed.
Q3. The SmartControl functions well at the beginning, but it is not workable, what can I do? A. If the following actions were executed, the monitor driver may need to be
●Change video graphic adapter to another one
●Update video driver
●Activities on OS, such as service pack or patch
●Run Windows Update and updated monitor and/or video driver
●Windows was booted with the monitor power off or disconnected.
To find out, please right click My Computer and click on
Q4. After installing SmartControl, when clicking on SmartControl tab, nothing shows up after a while or a failure message shows, what happened?
A. It might be your graphic adaptor is not compatible with the SmartControl. If your graphic adaptor is one of the above mentioned brands, try to download the most updated graphic adaptor driver from corresponding companies’ web site. Install the driver. Remove SmartControl, and
If it is still not working, we are sorry that the graphic adaptor is not supported. Please pay attention to Philips’ web site for any updated SmartControl driver available.
Q5. When I click on Product Information, only partial information is shown, what happened?
A. It might be your graphic card adaptor driver is not the most updated version which fully supporting DDC/CI interface. Please try to download the most updated graphic adaptor driver from corresponding companies’ web site. Install the driver. Remove SmartControl, and
Q6. In a monitor with the LightFrame feature, when LightFrame is enabled, sRGB adjustment in SmartControl is not responding, why?
A. When LightFrame is enabled, the sRGB adjustment is disabled automatically. To use sRGB, you need to disable LightFrame first.
RETURN TO TOP OF THE PAGE
file:///D/My%20Documents/dfu/A9/english/190s6/product/smart.htm (5 of