FAQs (Frequently Asked Questions)
Q:What if I get lost when I am making monitor adjustments?
A:Simply press the OSD button, then select 'Factory Reset' to recall all of the original factory settings.
Q:What is the Auto function?
A:The AUTO adjustment key restores the optimal screen position, phase and clock settings at the press of a single button – without the need to navigate through OSD menus and control keys.
Q:My Monitor has no power (Power LED does not light up). What should I do?
A:Make sure the AC power cord is connected to the Monitor.
Q:Will the LCD monitor accept an Interlace signal?
A:No. If an Interlace signal is used, the screen displays both odd and even horizontal scanning lines at the same time, thus distorting the picture.
Q:What does the Refresh Rate mean for LCD?
A:Unlike CRT display technology, in which the speed of the electron beam is swept from the top to the bottom of the screen determines flicker, an active matrix display uses an active element (TFT) to control each individual pixel and the refresh rate is therefore not really applicable to LCD technology.
Q:Will the LCD screen be resistant to scratches?
A:A protective coating is applied to the surface of the LCD, which is durable to a certain extent (approximately up to the hardness of a 2H pencil). In general, it is recommended that the panel surface is not subject to any excessive shocks or scratches. An optional protective cover with greater scratch resistance is also available.
Q:How should I clean the LCD surface?
file:///D/My%20Documents/dfu/190G6/english/190g6/safety/saf_faq.htm (2 of